-
-
-
-
PRODUCTS
-
GYX-L04-1 Shoulder Joint Rehabilitation Device
GYX-L04-1 Shoulder Joint Rehabilitation Device
[Specification]: 1140×1054×1291（ mm)
[Safe Usage Scope]: 3200×4100 (mm)
[Instructions for Use]: The user assumes a low, stable stance with legs slightly bent, keeps the torso upright, and presses down on the turntable with both hands while rotating the massager in the same or opposite direction.
[Main Features]: Strengthen the shoulder girdle muscles and improve the flexibility and mobility of the shoulder, elbow, and wrist joints.
Category:
Product Description
◆ Direct-buried type: the main upright posts are made of national-standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The cantilever tubing is made of national-standard steel pipe with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The turntable features a fully enclosed design, and the handle employs a stamped raised‑dot structure with a height not exceeding 6 mm, eliminating snagging and being formed in a single stamping operation.
◆ The top of the column is sealed, with a PVC soft‑material cap molded by die‑casting and featuring a wall thickness of 4 mm to prevent rainwater ingress.
◆ Internally equipped with high-quality bearings to meet operational requirements;
◆ The machine’s bearings are equipped with specially designed skeletal oil seals, offering excellent sealing performance, effective water and dust resistance, and long-lasting durability.
◆ The equipment nameplate is made of stainless steel, secured with pull rivets, and its edges are tightly fitted against the upright post to prevent snagging, scratching, or other damage.
◆ The equipment has undergone relevant static load and strength load tests in accordance with the GB 19272-2024 standard and meets the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with GB 19272-2024.
Standard;
◆ The equipment features a two‑station configuration, allowing two users to operate it simultaneously.
◆ The equipment shall be embedded to a depth of no less than 500 mm, with an underground installation dimension of no less than 400 × 400 × 600 mm.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. For tube bending, a CNC pipe‑bending machine is employed, delivering accurate angles and an aesthetically pleasing finish. Prior to welding, the parts undergo degreasing to ensure that no oil or contaminants remain on the surface. Welding is performed with a CO₂‑shielded arc welder using a mixed gas, resulting in clean, smooth welds that require no post‑weld grinding. A dust‑collection and treatment system is installed to purify workshop air and safeguard worker health. Surface preparation utilizes shot blasting, achieving thorough rust removal and enhancing the adhesion of the powder coating. Electrostatic powder coating follows a two‑coat process: an epoxy‑rich zinc‑based primer is applied first, followed by a green‑friendly, environmentally safe exterior powder coat. Imported electrostatic coating equipment ensures uniform powder distribution and strong adhesion, producing a coating that resists acids and alkalis, withstands humid‑heat conditions, resists aging and corrosion, and maintains an attractive appearance—making it ideal for humid and acid‑rain environments. The coating formulation contains no toxic elements. Powder recovery employs a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6%, which reduces material waste and minimizes dust pollution while offering convenient operation and energy efficiency.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts during transit and ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
