-
-
-
-
PRODUCTS
-
GYX-L40A Elliptical Trainer
GYX-L40A Elliptical Trainer
[Specification]: 1450×673×1394 (mm)
[Safe Usage Scope]: 4500×3700 (mm)
[Instructions for Use]: The user places both feet on the pedals, grasps the handles firmly with both hands, stands upright, and looks straight ahead. Coordinating the legs and arms, the feet propel the pedals while the handles swing back and forth. When one foot presses down, the opposite hand pulls the handle backward, and vice versa. The legs and arms perform simultaneous reciprocating movements.
[Main Features]: It strengthens the upper limbs, core, and lower-body muscles, enhancing muscular strength and endurance, while improving whole-body coordination and the ability to synchronize hand–foot movements. Prolonged use effectively enhances cardiopulmonary function, supports cardiovascular health and respiratory efficiency, and boosts metabolic rate, making it a highly valuable piece of cardio‑training equipment.
Category:
Product Description
[Main Technical Parameters]:
◆ Directly buried type; the front upright post uses a diameter of 114 mm, a national-standard steel pipe with a wall thickness of 3 mm ； The rear post uses a diameter of 88 mm, with a wall thickness of 3 mm, conforming to the national standard for steel pipes;
◆ Main frame shaft tube diameter 60 mm, a national-standard steel pipe with a wall thickness of 3 mm, and a shaft diameter of 28 mm, after The bushing uses a diameter of 73 mm, a 7-mm-thick seamless pipe, gives the equipment greater strength and load-bearing capacity.
◆ The handrail is made of national-standard steel tubing with a diameter of 32 mm and a wall thickness of 2.5 mm; the connecting rod has a diameter of 42 mm and a wall thickness of 2.5 mm. The upper and lower bearing sleeves are made of seamless tubes with diameters of 60 mm and 50 mm, respectively, and wall thicknesses of 7 mm, each fabricated from four high-quality components. Bearing 6205 and four high-quality 6004 bearings are used, respectively;
◆ The rod‑connecting link is made of a 40×40×2.5 square tube, and the bushing is a seamless pipe with a diameter of 60 mm and a wall thickness of 7 mm, for connection. The board thickness is 8 mm;
◆ The foot pedal is stamped from 4-mm-thick cold-rolled steel, ensuring an 8-year service life and featuring anti-slip measures to prevent slipping during use. Personnel injury: the edge height around the pedal exceeds 30 mm, and the perimeter is chamfered with an R2 radius to prevent personal injury.
◆ The crank connecting plate has a wall thickness of 14 mm; one end of the shaft seat is made from round steel with a diameter of 65 mm, while the other end uses round steel with a diameter of 55 mm. Round steel machined connecting shaft, with a bearing seat diameter of 25 mm;
◆ The spindle is machined from 35 mm diameter round steel, with a bearing seat of 30 mm diameter, and is supported by two high-quality 6206 bearings.
◆ Internally, a wear-resistant nylon damper is installed between the two bearings to regulate rotational speed and ensure user safety. Complete, ensuring compliance with usage requirements;
◆ The machine’s bearings are equipped with specially designed skeletal oil seals, offering excellent sealing performance, effective water and dust resistance, and long-lasting durability.
◆ The equipment nameplate is made of fully stainless steel with a corrosion-resistant finish, measures 220×80 mm, features robust rivets, and has edges that fit tightly against the upright post.
Avoid causing snagging injuries;
◆ The equipment has undergone relevant static load, stability, impact, and fatigue tests in accordance with the GB 19272-2011 standard and complies with it. Standard requirements.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment features a one-stop exercise station and can be used by a single user at the same time.
◆ The embedding depth of the equipment upright shall be no less than 400 mm, and the underground dimensions shall be no less than 400 × 400 × 500 mm.
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight, smooth bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal, increases the workpiece’s surface area, and enhances the adhesion of the powder coating. Outer surface: Forbidden City green ring Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to high humidity and heat, aging, and corrosion, with an aesthetically pleasing appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6% and resulting in cost savings. The powder reduces dust pollution, is easy to handle, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping tape, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
