-
-
-
-
PRODUCTS
-
GYX-L23 Multi-Station Trainer
GYX-L23 Multi-Station Trainer
[Specification]: 1453×843×2340 (mm)
[Safe Usage Scope]: 5250X4650 (mm)
[Instructions for Use]: Lat pulldown: Grip the handle with a pronated (overhand) or supinated (underhand) grip, pull firmly upward, then slowly return to the starting position and repeat.
Arm Support: The practitioner grasps the handles with both hands in a two‑arm support position, then simultaneously bends the arms while keeping the legs straight, aligning the body into a straight line so that the bar reaches chest level. Next, forcefully extend the arms in one swift motion (gripping the handles firmly to prevent falling), and repeat the movement.
[Main Features]: It strengthens the muscles of the upper limb girdle, chest, and shoulders while improving flexibility, particularly enhancing the strength of the deltoids, biceps, and triceps. It also increases the supporting capacity of the upper‑limb and wrist muscles and the load‑bearing capability of the upper‑limb bones, thereby improving the range of motion in the shoulder, elbow, wrist, and finger joints and enhancing overall motor coordination and integrated body‑wide cooperation.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct‑buried design; the main upright posts are made of national‑standard steel pipes with a diameter of 114 mm and a wall thickness of 3 mm; the pull‑up bar’s crossbeam has a diameter of 88 mm,
Wall thickness 3 mm national‑standard steel pipe; support rib plate thickness: 6 mm; arm‑support crossbeam with a side length of 50 mm and wall thickness
2.5mm high-quality square tube;
◆ Both the pull-up handle and the arm-support handrail are made of national-standard steel tubing with a diameter of 32 mm and a wall thickness of 3 mm; the pull-up connecting tube is… Diameter 32 mm, wall thickness 3 mm, conforming to national standards; width 635 mm.
◆ The intermediate back panel is made of 3-mm-thick steel plate, and the connecting cross tubes are standard‑grade steel pipes with a diameter of 32 mm and a wall thickness of 3 mm.
◆ The equipment nameplate is made of fully stainless steel with a corrosion‑resistant finish, measuring 185×80 mm. It is secured with robust rivets, and its edges fit tightly against the upright post, avoiding… Prevent snagging injuries;
◆ The column cap adopts External扣 style , avoid entering rainwater;
◆ Four The handle is made of vulcanized rubber, offering a comfortable grip and excellent resistance to aging. It also features anti-theft measures, ensuring safety and durability. Handle The end diameter is greater than 50 mm;
◆ The equipment has undergone relevant static load and stability tests in accordance with the GB 19272-2011 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching areas; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The buffer layer is 200 mm thick to prevent accidental injuries to users.
◆ The underground installation dimensions shall be no less than 500×500×900 mm;
◆ The equipment features a two‑station exercise configuration, allowing two users to operate simultaneously.
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing, thorough rust removal, increased surface area of the workpiece, enhanced adhesion of the plastic powder, and an imperial‑purple green coating on the exterior. Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an attractive appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone-type centrifugal separator, achieving a recovery rate of up to 98.6%, saving… The powder reduces dust pollution, is easy to operate, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping tape, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
