-
-
-
-
PRODUCTS
-
GYX-L37 Neck and Lumbar Massager
GYX-L37 Neck and Lumbar Massager
[Specification]: 1939×753×1319 (mm)
[Safe Usage Scope]: 5000×3800 (mm)
[Instructions for Use]: The user sits in the seat, with the neck firmly pressed against the massage bar, and holds the handle with both hands, moving it slowly up and down to massage the neck muscles. Alternatively, the user sits in the seat, grips the armrest, presses the lower back firmly against the massage bar, and gently moves the armrest up and down to massage the lumbar muscles, repeating the motion.
[Main Features]: It relaxes the muscles of the neck and lower back, effectively relieving fatigue in the lumbar, dorsal, and cervical regions, regulating the nervous system, improving blood circulation in the lumbar area, unblocking the meridians to promote smooth flow of qi, and harmonizing the functions of the relevant internal organs.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct burial: the main upright columns are made of national-standard steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The limit switch employs a fully cast-steel, three‑sided impact‑type internal limiter, increasing the load‑bearing area. The impact pad is made of polyurethane, offering excellent resistance to… Impact-resistant, with excellent elasticity, aging resistance, and resistance to both high and low temperatures; equipped with two high-quality 6205 bearings and a central shaft diameter of 25 mm. The limit side plate has a thickness of 10 mm. Limit sleeve diameter 133 mm, length 80 mm, thickness 8 mm, Ensure compliance with usage requirements, All exposed edges are chamfered with an R2 radius to reduce impact-related injuries.
◆ The handrail employs a tube-reduction technique, tapering the 42 mm‑diameter tubing down to 32 mm in diameter to facilitate the installation of the handle sleeve; this… This method offers excellent structural integrity, an aesthetically pleasing appearance, ease of fabrication, and long-lasting durability.
◆ The seat panel is formed by stamping a cold-rolled steel sheet with a diameter of 300 mm, a height of 22 mm, and a thickness of 4 mm, featuring R2 chamfers around the perimeter to prevent… Risk of injury from cuts; constructed by joining national‑standard steel pipes with diameters of 48 mm and 32 mm, each having a wall thickness of 2.5 mm.
◆ The machine’s bearings are equipped with specially designed skeletal oil seals that provide excellent sealing, effectively preventing water and dust ingress for long-lasting durability.
◆ The waist massage roller is made of nylon alloy, offering excellent resistance to aging and extreme temperatures, delivering a comfortable massage while ensuring safety and durability. The shaft diameter is 25 mm, and it uses four high-quality 6205 bearings.
◆ The neck massager is made of nylon and designed to match the natural anatomy of the human neck. Its surface has just the right level of firmness, conforming to the contours of the body. Usage requirements for the Mo;
◆ The handle grip is made of Vulcanized rubber Made of high-quality material, it offers a pleasant tactile experience and excellent resistance to aging; additionally, it features anti-theft measures for enhanced safety and durability.
◆ The top of the upright post is sealed, and the cap is formed by stamping 2-mm-thick steel plate; a Guiyu Xing logo is mounted on the top. Avoid entering rainwater;
◆ The equipment nameplate is made of fully stainless steel with an etched finish, measuring 220×80 mm; it is secured with rivets for robustness, and its edges fit tightly against the upright post.
Avoid causing snagging injuries;
◆ The equipment has undergone relevant static load and stability tests in accordance with the GB 19272-2011 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment features two exercise stations, allowing only two users at a time.
◆ The embedding depth of the equipment upright shall be no less than 500 mm, and the underground dimensions shall be no less than 500 × 500 × 600 mm.
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface, followed by welding. Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑grit finishing ensures thorough rust removal, increases the workpiece’s surface area, and enhances the adhesion of the powder coating. Outer surface: Forbidden City green ring Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an attractive appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone-type centrifugal separator, achieving a recovery rate of up to 98.6% and resulting in savings. The powder reduces dust pollution, is easy to handle, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: internally wrapped with thickened bubble wrap and externally secured with strapping, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
