-
-
-
-
PRODUCTS
-
GYX-L38A Rowing Machine
GYX-L38A Rowing Machine
[Specification]: 1225×1013×1058 (mm)
[Safe Usage Scope]: 4300×4050 (mm)
[Instructions for Use]: The exerciser sits on the rowing machine, feet firmly planted on the footrests, head lifted, chest upright, and abdomen engaged, with eyes gazing straight ahead. The torso is extended forward as much as possible, hands gripping the handles; as the upper body leans back, the arms pull backward in a continuous rowing motion, performing a rhythmic extension and flexion of the arms.
[Main Features]: It enhances flexibility and coordination in the arms, waist, legs, and other body parts.
Category:
Product Description
[Main Technical Parameters]:
◆ Directly buried type; the main upright posts are made of national-standard steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The main frame’s horizontal tubes are made of national‑standard steel pipes with a diameter of 88 mm and a wall thickness of 3 mm; the limiting connecting rods have a diameter of 48 mm and a wall thickness of 3 mm.
◆ The seat’s horizontal tube is made of national‑standard steel pipe with a diameter of 60 mm and a wall thickness of 3 mm; the footrest bar is also 60 mm in diameter with a 3 mm wall thickness. The footrests are equipped with anti-slip devices to prevent slipping and potential injuries.
◆ The limit switch employs a fully cast-steel, three‑sided impact‑type internal limiter, increasing the load‑bearing area. The impact pad is made of polyurethane, offering excellent resistance to… Impact-resistant, with excellent elasticity, aging resistance, and resistance to both high and low temperatures; equipped with two high-quality 6205 bearings and a central shaft diameter of 25 mm. The limit side plate has a thickness of 10 mm. Limit sleeve diameter 133 mm, length 80 mm, thickness 8 mm, Ensure compliance with usage requirements, All exposed edges are chamfered with an R2 radius to reduce impact-related injuries.
◆ The seat panel is formed by stamping a 4-mm-thick cold-rolled steel sheet, with R2 chamfers around the perimeter to prevent the risk of cuts.
◆ The handrail tubes are made of national-standard steel pipes with a diameter of 42 mm and a wall thickness of 3 mm, while the sleeve‑connected sections use specifications of… 50×50×2.5 mm national‑standard steel pipe; the bearing housing is a seamless tube with a 50 mm outer diameter and a 7 mm wall thickness; the diameter of the central rotating shaft is… 20 mm, connected to the main frame’s cross tube via four 6004 bearings, with the shaft ends sealed.
◆ The machine’s bearings are equipped with specially designed skeletal oil seals, offering excellent sealing performance, effective water and dust resistance, and long-lasting durability.
◆ The wall thickness of all connection plates for the equipment shall be no less than 8 mm.
◆ The handle grip is made of Vulcanized rubber Made of high-quality material, it feels great and is resistant to aging; additionally, it features anti-theft measures for safety and durability.
◆ The equipment nameplate is made of fully stainless steel with an etched finish, measuring 220×80 mm; it is secured with rivets for robustness, and its edges fit tightly against the upright post.
Avoid causing snagging injuries;
◆ The equipment has undergone relevant static load, stability, and fatigue tests in accordance with the GB 19272-2011 standard and complies with the standard requirements. Request.
◆ The equipment has undergone relevant static load and stability tests in accordance with the GB 19272-2011 standard and complies with its requirements.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment features a one‑stop exercise station and can be operated by a single user.
◆ The embedding depth of the equipment upright shall be no less than 500 mm, and the underground dimensions shall be no less than 500 × 500 × 600 mm.
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal, increases the workpiece’s surface area, and enhances the adhesion of the powder coating. Outer surface: Forbidden City green ring Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an attractive appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6% and resulting in significant savings. The powder reduces dust pollution, is easy to handle, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
