-
-
-
-
PRODUCTS
-
GYX-L25B Arm Support Trainer
GYX-L25B Arm Support Trainer
[Specification]: 1925×567×1450 (mm)
[Safe Usage Scope]: 5000×3600 (mm)
[Instructions for Use]: The practitioner grips the bar with both hands, jumps up to assume a two‑arm support position, then simultaneously bends both arms while keeping the legs straight, bringing the bar to chest level. Next, the arms are explosively extended, with the hands firmly gripping the bar to prevent falling, and the movement is repeated.
[Main Features]: Enhance the muscular strength of the upper limb girdle, chest, and shoulders, particularly the deltoids, biceps, and triceps; improve the supporting capacity of the upper‑limb and wrist muscles as well as the load‑bearing capability of the upper‑limb bones; and enhance overall motor coordination and integrated body‑wide coordination.
Category:
Product Description
[Main Technical Parameters]:
◆ Directly buried type; the main upright posts are made of national-standard steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The armrests are made of national‑standard steel tubing with a diameter of 42 mm and a wall thickness of 3 mm. The center-to-center distance between the two armrest tubes is 510 mm, meeting ergonomic requirements. One armrest tube is positioned 1,360 mm above the floor, while the other is 1,210 mm above the floor.
◆ The equipment nameplate is made of all‑stainless steel with a corrosion‑resistant finish, measuring 220×80 mm. It is secured with rivets for robustness, and its edges are tightly fitted against the upright posts to prevent… Prevent snagging injuries;
◆ The equipment has undergone relevant static load and stability tests in accordance with the GB 19272-2011 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The buffer layer is 200 mm thick to prevent accidental injuries to users.
◆ The underground installation dimensions shall be no less than 500×500×800 mm;
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface, followed by welding. Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an attractive appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing, thorough rust removal, increased surface area of the workpiece, enhanced adhesion of the plastic powder, and an imperial‑purple green coating on the exterior. Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an attractive appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6% and resulting in cost savings. The powder reduces dust pollution, is easy to handle, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping tape, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
