-
-
-
-
PRODUCTS
-
GYX-L42A-1 Exercise Bike
GYX-L42A-1 Exercise Bike
[Dimensions]: 1374×451×904 (mm)
[Safe Operating Range]: 4400×2500 (mm)
[Instructions for Use]: Sit in the seat, grasp the handles firmly with both hands, place both feet securely on the pedals, push down with your feet while pulling back with your hands.
[Key Features]: Enhances cardiovascular and pulmonary function, and improves muscle strength in the upper limbs, waist, abdomen, legs, and back, as well as coordination of all four limbs.
Category:
Product Description
◆ Direct‑buried design: the main upright posts are made of national‑standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm; the secondary upright posts are made of national‑standard galvanized steel pipes with a diameter of 48 mm and a wall thickness of 3 mm.
◆ The seat board and tubing are made of national-standard steel pipes with a diameter of 48 mm and a wall thickness of 3 mm.
◆ The upper limit device is connected to the main upright column using a national‑standard steel pipe with a diameter of 89 mm and a wall thickness of 3 mm. The seat plate is joined to the lower end of the upright column with a rectangular tube measuring 60 × 30 × 2 mm, forming a robust, integrated structure that ensures even load distribution and exceptional strength and durability.
◆ The handrail risers and the foot‑step cross members are made of national‑standard steel pipes with a diameter of 48 mm and a wall thickness of 3 mm; the areas where both feet step are equipped with anti‑slip features. Treatment: flexible end caps are installed at both ends, in compliance with the relevant standards.
◆ The seat panel is stamped from 4-mm-thick cold-rolled steel, ensuring an 8-year service life; the perimeter features R2 rounded corners to prevent personal injury.
◆ The clearance between the bearing clips and the shaft sleeve at all locations is greater than 30 mm to prevent finger injuries.
◆ The limit switch employs a double-sided impact‑type internal stop, increasing the load‑bearing area. The impact pad is made of polyurethane, offering excellent impact resistance, superior elasticity, and outstanding resistance to aging and extreme temperatures. It incorporates two high‑quality bearings, while the limit‑stop side plates are fabricated from national‑standard steel sheet, ensuring compliance with performance requirements. All exposed edges feature R2 chamfers to minimize injury in the event of collisions.
◆ The machine’s bearings are equipped with specially designed skeletal oil seals, offering excellent sealing performance, effective water and dust resistance, and long-lasting durability.
◆ The handle grips are made of vulcanized rubber, offering a comfortable feel and excellent resistance to aging; they also feature anti-theft measures for added safety and durability.
◆ The top of the column is sealed, with a PVC soft‑material cap molded by die‑casting and featuring a wall thickness of 4 mm to prevent rainwater ingress.
◆ The equipment nameplate is made of stainless steel, secured with pull rivets, and its edges are tightly fitted against the upright post to prevent snagging, scratching, or other damage.
◆ The equipment has undergone relevant static load, strength load, failure load, and fatigue load tests in accordance with the GB 19272-2024 standard and meets the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with GB 19272-2024. Standard;
◆ The equipment features a one‑stop exercise station and can be used by only one person at a time.
◆ The embedding depth of the equipment upright shall be no less than 400 mm, and the underground dimensions shall be no less than 400 × 400 × 500 mm.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. The finishing process ensures thorough rust removal and enhances the adhesion of the plastic powder. The electrostatic spraying employs a two‑coat application: first, an epoxy zinc‑rich primer is applied, followed by a green‑friendly, environmentally compliant exterior coating. Imported electrostatic spray equipment delivers uniform powder distribution and strong adhesion. The resulting coated surface exhibits excellent resistance to acids and alkalis, withstands humid‑heat conditions, resists aging, and offers superior corrosion protection, with an aesthetically pleasing appearance—making it ideal for humid climates and areas prone to acid rain. The product’s coating formulation contains no toxic elements. Powder recovery utilizes a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6%, thereby conserving material, reducing dust pollution, and ensuring convenient operation while promoting energy efficiency and environmental sustainability.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts and scratches during transit, ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
