-
-
-
-
PRODUCTS
-
GYX-L33A-1 Abdominal Board
GYX-L33A-1 Abdominal Board
[Dimensions]: 1444×459×470 (mm)
[Safe Operating Dimensions]: 4500×2500 (mm)
[Instructions]: Lie on your back on the machine, hook your feet under the bar, and place your hands behind your head with your fingers interlaced to protect your neck. Contract your abdominal muscles to lift your torso, then slowly lower yourself back down while maintaining tension in your abs. Repeat the movement.
[Key Features]: Strengthens and increases the flexibility of the core and abdominal muscles, effectively reduces excess belly fat, and is an essential piece of equipment for weight loss, body shaping, and achieving a toned physique.
Category:
Product Description
◆ Direct-buried type: the main upright posts are made of national-standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The panel support tubes are made of national-standard steel pipes with a diameter of 33 mm and a wall thickness of 2.5 mm, while the panel itself has a thickness of 2.2 mm. Thick cold plates are fully welded to the support tubes;
◆ The bottom crossbeam is made of national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The panel crossbeams are made of national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The toe‑kick crossbeam is fabricated from national‑standard steel tubing with a 48 mm diameter and a 3 mm wall thickness, fitted at both ends with flexible end caps, in full compliance with applicable standards.
◆ The top of the column is sealed, with a PVC soft‑material cap molded by die‑casting and featuring a 4 mm wall thickness to prevent rainwater ingress.
◆ The equipment features a one-stop exercise station, allowing for simultaneous use by a single user.
◆ The embedding depth of the equipment upright shall be no less than 400 mm, and the underground dimensions shall be no less than 400 × 400 × 500 mm.
◆ The equipment nameplate is made of stainless steel, secured with pop rivets, and its edges are tightly fitted against the upright post to prevent snagging, scratching, or other damage.
◆ The equipment has undergone relevant static load and strength load tests in accordance with the GB 19272-2024 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with GB 19272-2024. Standard;
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. The finishing process ensures thorough rust removal and enhances the adhesion of the plastic powder. The electrostatic spraying employs a two‑coat application: first, an epoxy zinc‑rich primer is applied, followed by a green‑friendly, environmentally safe exterior coating. Imported electrostatic spray equipment delivers uniform powder distribution and strong adhesion. The finished surface exhibits excellent resistance to acids and alkalis, withstands humid‑heat conditions, resists aging, and offers superior corrosion protection, with an aesthetically pleasing appearance—making it ideal for humid climates and areas prone to acid rain. The coating formulation contains no toxic elements. Powder recovery utilizes a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6%, which reduces material waste and minimizes dust pollution while ensuring convenient operation and energy efficiency.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts and scratches during transit, ensuring the equipment remains undamaged.
Keywords:
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
