-
-
-
-
PRODUCTS
-
GYX-L10-1 Lumbar and Back Massager
GYX-L10-1 Lumbar and Back Massager
[Dimensions]: 897×747×1530 (mm)
[Safe Operating Range]: 3900×2800 (mm)
[Instructions for Use]: Stand with your back to the device, grasp the handle, and press your back firmly against the massage bar. Slowly move from side to side to massage the back muscles, repeating the motion. Then, stand with your back to the device again, pressing your lower back against the massage bar, and perform up-and-down squats to massage the lower back and shoulder muscles, continuing the repeated movements.
[Main Functions]: Relaxes the muscles of the lower back and upper back, effectively alleviating muscle fatigue in the lumbar, dorsal, neck, and shoulder regions; regulates the nervous system; improves blood circulation in the lumbar and dorsal areas; clears the meridians to promote unobstructed flow of qi; and helps balance the functions of the relevant internal organs.
Category:
Product Description
◆ Direct-buried type: the main upright posts are made of national-standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The left and right armrest tubes at the waist are made of national-standard steel tubing with a diameter of 42 mm and a wall thickness of 3 mm; the armrest handles are formed using a tube-reducing process. Reduce the diameter of a 42 mm pipe to 33 mm to facilitate the installation of the handle sleeve; this method ensures excellent structural integrity and an aesthetically pleasing appearance. Easy to process and long-lasting;
◆ The waist‑area semi‑circular tube is made of national‑standard steel pipe with a diameter of 42 mm and a wall thickness of 3 mm; the connecting tube for the waist‑back assembly has a diameter of 60 mm. National-standard steel pipe with a wall thickness of 3 mm;
◆ The backrest armrest tube is made of national-standard steel tubing with a diameter of 33 mm and a wall thickness of 2.5 mm.
◆ The massage shaft is precision-machined to a diameter of 27 mm, ensuring a snug fit with the massage wand and smooth rotation.
◆ The top of the column is sealed, with a PVC soft‑material cap molded by die‑casting and featuring a 4 mm wall thickness to prevent rainwater ingress.
◆ A total of 6 small massage rods are used; the massage rods are made of… Made of PVC, with a moderately hard surface; the massaging protrusions meet ergonomic requirements for massage use.
◆ The handle grip is made of vulcanized rubber, offering a comfortable feel and excellent resistance to aging; it also features anti-theft measures for added safety and durability.
◆ The equipment nameplate is made of stainless steel, secured with pop rivets, and its edges are tightly fitted against the upright post to prevent snagging, scratching, or other damage.
◆ The equipment has undergone relevant static load and strength load tests in accordance with the GB 19272-2024 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards, and all apertures and gaps comply with GB 19272-2024. Standard;
◆ The equipment features a two‑station configuration, allowing only two users at a time.
◆ The embedding depth of the equipment upright shall be no less than 500 mm, and the underground dimensions shall be no less than 400 × 400 × 600 mm.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. The finishing process ensures thorough rust removal and enhances the adhesion of the plastic powder. The electrostatic spraying employs a two‑coat application: first, an epoxy zinc‑rich primer is applied, followed by a green‑friendly, environmentally safe exterior coating. Imported electrostatic spray equipment delivers uniform powder distribution and strong adhesion. The resulting coated surface exhibits excellent resistance to acids and alkalis, withstands humid‑heat conditions, resists aging, and offers superior corrosion protection, with an aesthetically pleasing appearance—making it ideal for humid climates and areas prone to acid rain. The product’s coating formulation contains no toxic elements. Powder recovery utilizes a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6%, which reduces material waste and minimizes dust pollution while ensuring convenient operation and energy efficiency.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts and scratches during transit, ensuring the equipment remains undamaged.
Keywords:
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
