-
-
-
-
PRODUCTS
-
Abdominal board
Abdominal board
[Model]: GYX-L33A-1
[Specification]: 1444×459×470 (mm)
[Safe Usage Scope] ： 4500×2500 (mm)
[Instructions for Use]: The exerciser lies on the machine, feet securely hooked under the bar, hands clasped behind the head for head support. Engage the abdominal muscles to lift the torso, then, as you lower back down, continue to contract the abs and slowly return to the starting position. Repeat the movement.
[Main Features] ： It strengthens and increases the flexibility of the core and abdominal muscles, effectively helps reduce excess belly fat, and is an essential piece of equipment for weight loss, body shaping, and achieving a toned physique.
Category:
Product Description
◆ Direct-buried type: the main upright posts are made of national-standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The panel support tubes are made of national‑standard steel pipes with a diameter of 33 mm and a wall thickness of 2.5 mm, while the panel surface is fabricated from 2.2‑mm‑thick cold‑rolled sheet steel and fully welded to the support tubes.
◆ The bottom crossbeam is made of national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The panel crossbeams are made of national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The toe‑kick crossbeam is fabricated from national‑standard steel tubing with a 48 mm diameter and a 3 mm wall thickness, and is fitted at both ends with flexible end caps, in compliance with applicable standards.
◆ The top of the column is sealed, with a PVC soft‑material cap molded by die‑casting and featuring a wall thickness of 4 mm to prevent rainwater ingress.
◆ The equipment features a one-stop exercise station, allowing for simultaneous use by a single user.
◆ The embedding depth of the equipment upright shall be no less than 400 mm, and the underground dimensions shall be no less than 400 × 400 × 500 mm.
◆ The equipment nameplate is made of stainless steel, secured with pop rivets, and its edges are tightly fitted against the upright post to prevent snagging, scratching, or other damage.
◆ The equipment has undergone relevant static load and strength load tests in accordance with the GB 19272-2024 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with the GB 19272-2024 standard.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. For the bending process, a CNC pipe bender is employed, delivering accurate angles and an aesthetically pleasing finish. Prior to welding, all parts undergo degreasing to ensure that no oil or contaminants remain on the surface. Welding is performed with a CO₂‑shielded arc welder using a mixed gas, resulting in clean, smooth welds that require no post‑weld grinding. A dust collection and treatment system is also installed to purify workshop air and safeguard workers’ health. Surface treatment utilizes shot blasting, providing thorough rust removal and enhancing the adhesion of the powder coating. Electrostatic powder coating is applied in two coats: first, an epoxy‑rich zinc‑based primer is sprayed, The exterior surface is coated with an environmentally friendly, green electrostatic powder finish. Utilizing imported electrostatic spraying equipment, the coating delivers uniform powder distribution and strong adhesion. The powder‑coated finish exhibits excellent resistance to acids and alkalis, withstands humid‑heat conditions, resists aging, and offers superior corrosion protection, while maintaining an attractive appearance—making it ideal for humid climates and areas exposed to acid rain. The coating formulation contains no toxic elements. Powder recovery employs a cyclone‑type centrifugal recovery system, achieving a recovery rate of up to 98.6%, which helps conserve powder, reduce dust pollution, and ensures convenient operation while promoting energy efficiency and environmental sustainability.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts and scratches during transit to ensure it arrives undamaged.
Keywords:
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
