-
-
-
-
PRODUCTS
-
GYX-L98 Finger Exercise Height-Reach Trainer
GYX-L98 Finger Exercise Height-Reach Trainer
[Specification]: 365×245×3070 (mm)
[Safe Usage Scope]: 3370 x 3250 (mm)
[Instructions for Use]: Place your fingers inside the PE board’s slotted frame and move them up and down. For the standing vertical jump reach, the exerciser stands beneath the reach‑testing device, adjusts their position, selects the target they wish to touch, and performs the movement by jumping vertically.
[Main Features]: Enhance finger dexterity and coordination. Strengthen the muscles of the lower limbs, effectively improving lower‑body explosive power and enhancing the stability of the knee and ankle joints.
Category:
Product Description
[Main Technical Parameters]:
◆ Directly buried type; the main upright posts are made of national-standard steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The columns and beams adopt 25×50 mm, with a wall thickness of 3 mm, conforming to the national standard for steel pipes;
◆ The elevation of the height-measuring device’s elevation board is 304 Stainless steel material, with a thickness of 1mm , and is connected to the main frame by ø4 It is joined by rivets, ensuring a secure and reliable connection.
◆ The fingerboard is made of engineering-grade plastic, with a total thickness of 15 mm and a depth of 9 mm, featuring rounded edges to ensure user safety.
◆ The embedding depth of the equipment upright shall be no less than 600 mm, and the underground dimensions shall be no less than 500 × 500 × 700 mm.
◆ The top of the column is sealed with a flat cap to prevent rainwater from entering.
◆ The equipment nameplate is made of fully stainless steel with an etched finish, measuring 220×80 mm; it is secured with rivets for robustness, and its edges fit tightly against the upright post. Avoid causing entanglement injuries;
◆ The equipment has undergone relevant static load and stability tests in accordance with the GB 19272-2011 standard and complies with its requirements.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment features a two‑station exercise configuration, accommodating two users.
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface, followed by welding. Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an attractive appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal, increases the workpiece’s surface area, and enhances the adhesion of the powder coating. Outer surface: Forbidden City green ring Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an attractive appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6% and resulting in significant savings. The powder reduces dust pollution, is easy to handle, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping tape, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
