-
-
-
-
PRODUCTS
-
Squat trainer
Squat trainer
[Model]: GYX-2020-8
[Specification]: 1409×925×1289 (mm)
[Instructions for Use]: Grasp the bar with both hands, position your feet shoulder-width apart and parallel, place the bar across your shoulders, and perform a squat‑to‑stand movement.
[Main Features] : Enhances lower‑extremity muscle strength, effectively improves the flexibility and mobility of the muscles and ligaments surrounding the knee joint, and increases its stability.
Category:
Product Description
[Main Technical Parameters]:
◆ Embedded installation; the main upright posts are made of national-standard square steel tubing with dimensions 100×150 mm and a wall thickness of 3 mm.
◆ The beam’s tubular members are made of national-standard steel pipes with dimensions 80×120 mm and a wall thickness of 3.5 mm.
◆ The counterweight block is guided by a rail system, with the guide rods made of stainless steel.
◆ The internal design incorporates an internal limiting structure, with a limiting sleeve measuring 159 mm in diameter and 5 mm in wall thickness, and a limiting plate 10 mm thick, ensuring compliance with operational requirements.
◆ The machine’s bearings are equipped with specially designed skeletal oil seals that provide excellent sealing, effectively preventing water and dust ingress for long-lasting durability.
◆ The handrail is made of national-standard steel tubing with a diameter of 32 mm and a wall thickness of 3 mm.
◆ The equipment’s movable components are equipped with a hydraulic cylinder for controlled descent; the appropriate descent speed is selected based on the counterweight.
◆ The equipment nameplate is securely fastened with pop rivets, with its edges tightly aligned against the upright post to prevent snagging and potential injury.
◆ The equipment has been tested in accordance with the GB 19272-2024 standard, and its static load and strength‑bearing capacity comply with the relevant requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with GB 19272-2024. Standard;
◆ The equipment is a single-station exercise station.
◆ The equipment shall be buried at a depth of no less than 600 mm, with burial dimensions of no less than 600 × 600 × 700 mm.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an attractive appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal and enhances the adhesion of the plastic powder coating. The electrostatic spraying process employs a two‑coat application: first, an epoxy zinc‑rich primer is applied, The exterior surface is coated with an environmentally friendly, green electrostatic powder finish. Utilizing imported electrostatic spraying equipment, the coating delivers uniform powder distribution and strong adhesion. The powder‑coated finish exhibits excellent resistance to acids and alkalis, withstands humid‑heat conditions, resists aging, and offers superior corrosion protection, while maintaining an attractive appearance—making it ideal for damp and acid‑rain environments. The coating formulation contains no toxic elements. Powder recovery employs a cyclone‑type centrifugal recovery system, achieving a recovery rate of up to 98.6%, thereby conserving powder, reducing dust pollution, and ensuring convenient operation in an energy‑efficient, eco‑friendly manner.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts during transit and ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
