-
-
-
-
PRODUCTS
-
Hand movement sequence
Hand movement sequence
[Model] : GYX-CZ07
[Specification] : 3100*330*1457 (mm)
[Instructions for Use]: For use by individuals with limited mobility in the upper limbs and fingers.
1. Slide both hands along the gaps in the execution board, gently spreading your fingers to match the shape of the finger‑shaped plate, and repeat the motion.
2. Place your fingers inside the strip-shaped grooves of the PE sheet and move them up and down, repeating the motion.
3. Grasp both the large and small handles with your hands, then slowly and firmly squeeze while pulling the smaller handle, repeating the motion.
4. Grasp the square handle of the turntable with one hand, apply force to rotate the handle, and repeat the motion.
[Main Features] : Enhance finger dexterity and coordination. Strengthen the muscles of the fingers and hands.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct-buried type: the main upright posts are made of national-standard steel pipes with a nominal diameter of 114 mm and a wall thickness of 3 mm.
◆ The special‑shaped motherboard is made from 3 mm‑thick national‑standard steel plate.
◆ The special-shaped movable panel is fabricated by edge-welding a 3-mm-thick national-standard steel plate.
◆ Both handles are formed by bending round steel, offering excellent strength and a long service life.
◆ The handle is constructed by splicing square tubes with dimensions of 20×30 mm, and its corners are rounded arc‑shaped.
◆ Both the built-in tower spring and the tension spring are standard‑compliant springs, offering excellent elasticity and long-lasting durability.
◆ The burial depth of the equipment shall be no less than 600 mm, and each underground pit shall measure at least 600 × 600 × 700 mm.
◆ The components are cut to size using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. For tube bending, a CNC pipe‑bending machine is employed, delivering accurate angles and an aesthetically pleasing finish. Prior to welding, all parts undergo degreasing to ensure the surface is free of oil and contaminants. Welding is performed with a CO₂‑shielded arc welder combined with a mixed‑gas process, producing clean, smooth welds that require no post‑weld grinding. A dust‑collection and treatment system further purifies workshop air, safeguarding worker health. Surface treatment utilizes shot blasting, achieving thorough rust removal while increasing the surface area to enhance powder‑coating adhesion. The exterior is coated with a green‑environmental, electrostatically applied powder finish—produced on imported electrostatic spraying equipment—ensuring uniform powder distribution, strong adhesion, and excellent resistance to acids, alkalis, humidity, heat, aging, and corrosion. This coating is ideal for humid and acid‑rain environments. The product’s paint formulation contains no toxic elements. Powder recovery is handled by a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6%, thereby conserving material, reducing dust pollution, and offering convenient operation in an energy‑efficient, environmentally friendly manner.
◆ The equipment is packaged in a double-layer system: an inner layer of thickened bubble wrap and an outer layer secured with strapping, effectively protecting it from impacts during transit and ensuring it arrives undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
