-
-
-
-
PRODUCTS
-
Hand and foot exercise combination
Hand and foot exercise combination
[Model] : GYX-CZ08
[Specification] : 4200*870*1900 (mm)
[Instructions for Use] 1. Hold the left and right handrails with both hands and perform a rotational movement.
2. Pedal with both feet in a circular motion, avoiding excessive speed.
3. Hold the textured massage rod and move it back and forth; alternatively, grip the rod firmly with both hands and hold it still to allow the raised bumps on the roller to provide deeper stimulation to acupoints on the hand.
[Main Features] : Whole-body coordinated exercise can significantly strengthen cardiovascular and pulmonary function and relieve fatigue. Massaging the palms to relax the hand muscles is highly beneficial for improving finger flexibility.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct‑buried type: the main upright posts are made of national‑standard steel pipes with a nominal diameter of 114 mm and a wall thickness of 3 mm.
◆ The turntable is fabricated from 8-mm-thick steel plates, with both sides machined to flatness to ensure end-face flatness; the outer end features an ABS-molded housing.
◆ The turntable handle features a shaft diameter of 19 mm, a bearing seat diameter of 15 mm, and a handle sleeve diameter of 32 mm; it is constructed from seamless steel tubing with a wall thickness of 4 mm and equipped with eight high-quality 61902 bearings.
◆ The shaft connecting pipe is made of national-standard steel tubing with a diameter of 42 mm and a wall thickness of 2.5 mm.
◆ The massage shaft support tube is fabricated by welding a 27 mm diameter steel pipe; the massage shaft fits tightly with the massage rod, ensuring smooth rotation.
◆ The massage stick is made of PVC, with a moderately hard surface; it measures 182 mm in length and 75 mm in diameter, featuring massage nodes 13 mm in diameter and 3 mm in height, meeting ergonomic requirements for massage use.
◆ The equipment shall be buried at a depth of no less than 600 mm, with burial dimensions of no less than 600 × 600 × 700 mm.
◆ The components are cut to size using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. For the bending process, a CNC pipe bender is employed, delivering accurate angles and an aesthetically pleasing finish. Prior to welding, all parts undergo degreasing to ensure that no oil or contaminants remain on the surface. Welding is performed with a CO₂‑shielded arc welder combined with a mixed‑gas shielding process, resulting in clean, smooth welds that require no post‑weld grinding. A dust collection and treatment system is also installed to purify workshop air and safeguard worker health. Surface treatment utilizes shot blasting, providing thorough rust removal, increasing the effective surface area of the workpiece, and enhancing the adhesion of the powder coating. The exterior is finished with a green‑friendly, environmentally compliant electrostatic powder coating applied using imported equipment, yielding uniform powder distribution and strong adhesion. This coating offers resistance to acids and alkalis, withstands humid and hot conditions, resists aging and corrosion, and maintains an attractive appearance—making it well suited for humid environments and areas prone to acid rain. The product’s coating formulation contains no toxic elements. Powder recovery is achieved through a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6%, thereby conserving material, reducing dust pollution, and ensuring ease of operation while promoting energy efficiency and environmental protection.
◆ The equipment is packaged in a double-layer system: an inner layer of thickened bubble wrap and an outer layer secured with strapping, effectively protecting it from impacts during transit and ensuring it arrives undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
