-
-
-
-
PRODUCTS
-
Elliptical machine
Elliptical machine
[Model] : GYX-X03
[Specification] : 3550×616×2051 (mm)
[Instructions for Use] : The user places both feet on the pedals, grasps the handles firmly with both hands, stands upright, and looks straight ahead. Coordinating the legs and arms, the feet propel the pedals while the handles swing back and forth. As one foot presses down on its pedal, the opposite hand pulls the handle backward, and vice versa. The limbs perform simultaneous reciprocating movements.
[Main Features] It strengthens the upper limbs, core, and lower-body muscles, enhancing muscular strength and endurance, while improving whole-body coordination and the ability to synchronize hand–foot movements. Prolonged use effectively enhances cardiopulmonary function, improves cardiovascular health and respiratory capacity, and boosts metabolic rate, making it a highly valuable piece of cardio‑training equipment.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct-buried type: the front uprights are made of national-standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm; the rear uprights are made of national-standard galvanized steel pipes with a diameter of 89 mm and a wall thickness of 3 mm.
◆ The main frame and uprights are connected by flanges, with a thickness of 10 mm.
◆ The flanged connection pipe is made of national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The main frame’s axle tube is a national-standard steel pipe with a diameter of 60 mm and a wall thickness of 3 mm; the rear axle sleeve is a seamless pipe with a diameter of 73 mm and a wall thickness of 7 mm. Tube, enabling the equipment to withstand higher loads.
◆ The handrail is made of national-standard steel tubing with a diameter of 33 mm and a wall thickness of 2.5 mm; the connecting rod has a diameter of 42 mm and a wall thickness of 3 mm.
◆ The pedal‑rod linkage is constructed from 40×40×2.5 square tubing, while the bushings are made of seamless tubing with a 60 mm diameter and a 5 mm wall thickness, ensuring secure connections. The board thickness is 8 mm;
◆ The footboard is stamped from 4-mm-thick cold-rolled steel, ensuring an 8-year service life and featuring anti-slip measures to prevent slipping during use. Personnel injury: the edge height around the pedal exceeds 30 mm, and the perimeter is chamfered with an R2 radius to prevent personal injury.
◆ The crank connecting plate has a wall thickness of 14 mm; one end of the shaft seat is made from round steel with a diameter of 65 mm, while the other end uses round steel with a diameter of 55 mm. Round steel machined connecting shaft;
◆ Internally, a wear-resistant nylon damper is installed between the two bearings to regulate rotational speed and ensure user safety. Complete, ensuring compliance with usage requirements;
◆ The machine’s bearing waterproof seals utilize specially designed skeletal oil seals, offering excellent sealing performance, effective water and dust resistance, and long-lasting durability.
◆ The equipment nameplate is secured with pop rivets, with its edges tightly aligned against the upright post to prevent snagging, scratching, or other damage.
◆ The equipment has undergone relevant static load, strength load, and fatigue load tests in accordance with the GB 19272-2024 standard and meets the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with GB 19272-2024. Standard;
◆ The equipment features a two‑station exercise configuration, allowing two users to operate simultaneously.
◆ The main upright post shall be embedded to a depth of no less than 600 mm, with an underground pit measuring at least 865 × 500 × 700 mm; the equipment upright post shall be embedded to a depth of no less than 400 mm, with an underground pit measuring at least 400 × 400 × 500 mm.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight, smooth bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal and enhances the adhesion of the plastic powder coating. The electrostatic spraying process employs a two‑coat application: first, an epoxy zinc‑rich primer is applied, The exterior surface is coated with an environmentally friendly, green electrostatic powder finish. Utilizing imported electrostatic spraying equipment, the coating delivers uniform powder distribution and strong adhesion. The powder‑coated finish exhibits excellent resistance to acids and alkalis, withstands humid and hot conditions, resists aging and corrosion, and maintains an attractive appearance—making it ideal for damp environments and areas prone to acid rain. The coating formulation contains no toxic elements. Powder recovery employs a cyclone‑type centrifugal recovery system, achieving a recovery rate of up to 98.6%, which helps conserve powder, reduce dust pollution, and ensures convenient operation while promoting energy efficiency and environmental protection.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts and scratches during transit, ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
