-
-
-
-
PRODUCTS
-
Walking machine
Walking machine
[Model]: GYX-X05
[Specification] : 2678×634×2051 (mm)
[Instructions for Use] : Grip the bar firmly, stand on the footplate, keep your chest lifted and head held high, and maintain a straight back. Swing your legs forward and backward in a natural, upright motion; you can adjust the intensity by varying the amplitude and frequency of the swing.
[Main Features] : Enhances cardiopulmonary function and the strength of the lower limbs and lumbar muscles; improves lower‑limb flexibility and coordination; provides load‑bearing support for the joints of the lower extremities.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct‑buried design: the main upright posts are made of national‑standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm; the equipment upright posts are made of national‑standard galvanized steel pipes with a diameter of 89 mm and a wall thickness of 3 mm.
◆ The main frame and uprights are connected by flanges, with a thickness of 10 mm.
◆ The flanged connection pipe is made of national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The swing-arm tubing is made of national-standard steel pipe with a diameter of 60 mm and a wall thickness of 3 mm; the swing arm is directly welded to the footplate, ensuring robustness and durability.
◆ The footboard is stamped from 4-mm-thick cold-rolled steel, ensuring an 8-year service life and featuring anti-slip measures to prevent slipping during use. Personnel injury prevention: the edge height around the tread is greater than 30 mm, with a fillet radius of R2; cushioning rubber pads are installed at the front and rear of the tread to prevent personal injury.
◆ The handrail tube is made of national-standard steel pipe with a diameter of 33 mm and a wall thickness of 2.5 mm.
◆ The limit sleeve is made of a national‑standard steel pipe with a diameter of 114 mm and a wall thickness of 4 mm. The impact pad is constructed from polyurethane, offering excellent impact resistance, superior elasticity, and outstanding resistance to aging and extreme temperatures. The pendulum arm limit sleeve has a diameter of 73 mm and a wall thickness of 7 mm; its ends are welded to the pendulum leg, and it incorporates four high‑quality bearings to meet the requirements of impact testing. The allowable lateral swing angle is less than 70° on each side, and all exposed edges are chamfered with an R3 radius to minimize injury in the event of a collision.
◆ The machine’s bearings are equipped with specially designed skeletal oil seals, offering excellent sealing performance, effective water and dust resistance, and long-lasting durability.
◆ The top of the column is sealed, with a PVC soft‑material cap molded by die‑casting to prevent rainwater ingress.
◆ The equipment nameplate is secured with pop rivets, with its edges tightly fitted against the upright post to prevent snagging, scratching, or other damage.
◆ The equipment features a two‑station exercise configuration, allowing two users to operate simultaneously.
◆ The equipment has undergone relevant tests in accordance with the GB 19272-2024 standard, including static load, strength load, impact load, failure load, and fatigue load tests, as well as impact‑resistance testing for oscillating components, and complies with the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with GB 19272-2024. Standard;
◆ The main upright post shall be embedded to a depth of no less than 600 mm, with an underground pit measuring at least 865 × 500 × 700 mm; the equipment upright post shall be embedded to a depth of no less than 400 mm, with an underground pit measuring at least 400 × 400 × 500 mm.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface. Welding is performed using a CO₂ shielded arc welding machine with a mixed gas, resulting in aesthetically pleasing welds with straight, smooth beads that require no post-weld grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal and enhances the adhesion of the plastic powder coating. The electrostatic spraying process employs a two‑coat application: first, an epoxy zinc‑rich primer is applied, The exterior surface is coated with an environmentally friendly, green electrostatic powder finish. Utilizing imported electrostatic spraying equipment, the coating delivers uniform powder distribution and strong adhesion. The powder‑coated surface exhibits excellent resistance to acids and alkalis, withstands humid‑heat conditions, resists aging, and offers superior corrosion protection, while maintaining an attractive appearance—making it ideal for humid climates and areas exposed to acid rain. The coating formulation contains no toxic elements. Powder recovery employs a cyclone‑type centrifugal recovery system, achieving a recovery rate of up to 98.6%, which helps conserve powder, reduce dust pollution, and ensures convenient operation while promoting energy efficiency and environmental sustainability.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts and scratches during transit to ensure it arrives undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
