-
-
-
-
PRODUCTS
-
Abdominal and back muscle trainer
Abdominal and back muscle trainer
[Model] : GYX-X20
[Specification] : 2181×1465×2051 (mm)
[Instructions for Use] ：
Back Muscles: Stand facing the machine, grasp the handles on both sides with your hands, press your abdomen firmly against the upper abdominal pad, and place your feet between the dual‑layer footrests beneath the machine. Cross your hands behind your neck or interlace them behind your back, then perform a downward bending and lifting motion, alternating repetitions to work the muscles.
Abdominals: Lie on your back on the machine, secure your feet under the foot bar, and place your hands crossed behind your head to support your neck. Contract your abdominal muscles to lift your torso, then slowly lower yourself back down while maintaining tension in your abs. Repeat.
[Main Features] ：
1. Enhance the tensile strength of the back and abdominal muscles and their associated ligaments, improve the coordination among the small muscle groups of the back, increase the mobility and flexibility of the back muscles, and effectively boost the endurance of the back musculature.
2. It strengthens and increases the flexibility of the core and abdominal muscles, effectively reducing excess belly fat, making it an essential piece of equipment for weight loss, body shaping, and achieving a toned physique.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct-buried type: the main upright posts are made of national-standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The main frame and upright posts are connected by flanges, with a thickness of 10 mm.
◆ The flanged connection pipe is made of national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The panel support tubes are made of national-standard steel pipes with a diameter of 33 mm and a wall thickness of 2.5 mm, while the panel itself has a thickness of 2.2 mm. Thick cold plates are fully welded to the support tubes;
◆ The bottom crossbeam is made of national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The panel crossbeams are made of national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The toe‑kick crossbeam is fabricated from national‑standard steel tubing with a diameter of 48 mm and a wall thickness of 3 mm, and is fitted at both ends with flexible end caps, in compliance with applicable standards.
◆ The top of the column is sealed, with a PVC soft‑material cap molded by die‑casting and featuring a wall thickness of 4 mm to prevent rainwater ingress.
◆ The handrail employs a tube-reduction technique, tapering the 42 mm‑diameter tubing down to 32 mm in diameter to facilitate the installation of the handle sleeve; this type of square… The material exhibits excellent overall integrity, an aesthetically pleasing appearance, ease of machining, and long-lasting durability.
◆ The backrest panel is formed by stamping 4-mm-thick cold-rolled steel, ensuring an 8-year service life; the perimeter features rounded corners with a radius of R2 to prevent personal injury. The foot‑rest crossbeam has a diameter of 48 mm and a wall thickness of 3 mm, with anti‑slip treatment at the double‑foot‑contact area, and soft end caps installed at both ends, in compliance with applicable standards.
◆ The equipment nameplate is secured with pop rivets, with its edges tightly aligned against the upright post to prevent snagging, scratching, or other damage.
◆ The equipment has undergone relevant static load and strength load tests in accordance with the GB 19272-2024 standard and meets the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with GB 19272-2024. Standard;
◆ The equipment features a two‑station exercise configuration, allowing two users to operate simultaneously.
◆ The main upright post shall be embedded to a depth of no less than 600 mm, with an underground dimension of no less than 865 × 500 × 700 mm; the equipment shall be embedded. Depth shall be no less than 400 mm, and the underground dimensions shall be no less than 400 × 400 × 500 mm.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. The finishing process ensures thorough rust removal and enhances the adhesion of the plastic powder. The electrostatic spraying employs a two-coat application: first, an epoxy zinc‑rich primer is applied, The exterior surface is coated with an environmentally friendly, green electrostatic powder finish. Utilizing imported electrostatic spraying equipment, the coating delivers uniform powder distribution and strong adhesion. The powder‑coated finish exhibits excellent resistance to acids and alkalis, withstands humid and hot conditions, resists aging, and offers superior corrosion protection, while maintaining an attractive appearance—making it ideal for humid environments and areas exposed to acid rain. The coating formulation contains no toxic elements. Powder recovery employs a cyclonic centrifugal system, achieving a recovery rate of up to 98.6%, which helps conserve powder, reduce dust pollution, and ensure convenient operation—all while promoting energy efficiency and environmental sustainability.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts and scratches during transit, ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
