-
-
-
-
PRODUCTS
-
Waveboard
Waveboard
[Model]: GYX-X14
[Specification] : 1784×819×2051 (mm)
[Instructions for Use] Hold the handle with both hands, place both feet on the pedals simultaneously, and swing your body from side to side.
[Main Features] : Enhance cardiopulmonary function and the strength of the lower limbs and lumbar muscles; improve lower‑limb flexibility and coordination; increase the load‑bearing capacity of the lower‑limb joints.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct‑buried type: both the main upright posts and the equipment mounting posts are made of national‑standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The main frame and equipment are connected via flanges, with a thickness of 10 mm.
◆ The flanged connection pipe is made of national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The boom tubing is made of national-standard steel pipe with a diameter of 60 mm and a wall thickness of 3 mm; at the handrail section, a reducing‑pipe technique is employed to decrease the diameter to 42 mm. The pipe diameter is reduced to 33 mm to facilitate the installation of the ferrule; this approach offers excellent structural integrity, an aesthetically pleasing appearance, and ease of fabrication. Durable and long-lasting, the support tube is made of national‑standard steel pipe with a diameter of 33 mm and a wall thickness of 2.5 mm.
◆ The limit sleeve is made of a national‑standard steel pipe with a diameter of 114 mm and a wall thickness of 4 mm. The impact pad is crafted from polyurethane, offering excellent impact resistance, superior elasticity, and outstanding resistance to aging and extreme temperatures. The pendulum arm limit sleeve has a diameter of 73 mm and a wall thickness of 7 mm; its ends are welded to the pendulum leg, and it incorporates four high‑quality bearings to meet the requirements of the impact test. The allowable lateral swing angle is less than 70° on each side, and all exposed edges are chamfered with an R3 radius to minimize injury in the event of a collision.
◆ The machine’s bearings are equipped with specially designed skeletal oil seals, offering excellent sealing performance, effective water and dust resistance, and long-lasting durability.
◆ The footboard is stamped from 4-mm-thick steel plate, with an anti-slip device at the foot‑pressing area; the height of the anti-slip platform shall be no less than 30 mm. To prevent injuries caused by tripping or slipping, the perimeter is chamfered with a radius of R2, and anti‑collision rubber pads are installed on both sides of the tread to protect users. Harm;
◆ The top of the column is sealed, with a PVC soft‑material cap molded by die‑casting and featuring a wall thickness of 4 mm to prevent rainwater ingress.
◆ The equipment nameplate is secured with pop rivets, with its edges tightly aligned against the upright post to prevent snagging, scratching, or other damage.
◆ The equipment has undergone relevant tests in accordance with the GB 19272-2024 standard, including static load, strength load, impact load, failure load, and fatigue load tests, as well as impact‑resistance testing of oscillating components, all of which comply with the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with GB 19272-2024. Standard;
◆ The equipment features a two‑station exercise configuration, allowing two users to operate it simultaneously.
◆ The main column shall be embedded to a depth of not less than 600 mm, and the dimensions of the underground pit shall be no smaller than 865 × 500 × 700 mm.
◆ The embedding depth of the equipment upright shall be no less than 500 mm, and the underground dimensions shall be no less than 400 × 400 × 400 mm.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe-bending machine, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal and enhances the adhesion of the plastic powder. The electrostatic spraying process employs a two‑coat application: first, an epoxy zinc‑rich primer is applied, The exterior surface is coated with an environmentally friendly, green electrostatic powder finish. Utilizing imported electrostatic spraying equipment, the coating delivers uniform powder distribution and strong adhesion. The powder‑coated finish exhibits excellent resistance to acids and alkalis, withstands humid and hot conditions, resists aging, and offers superior corrosion protection, while maintaining an attractive appearance—making it ideal for humid environments and areas exposed to acid rain. The coating formulation contains no toxic elements. Powder recovery employs a cyclone‑type centrifugal recovery system, achieving a recovery rate of up to 98.6%, which helps conserve powder, reduce dust pollution, and ensures convenient operation while promoting energy efficiency and environmental sustainability.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts during transit and ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
