-
-
-
-
PRODUCTS
-
Parent-child interactive rowing machine
Parent-child interactive rowing machine
[Model]: GYX-QZQ09
[Specification]: 2834×1062×989 (mm)
[Safe Usage Scope]: 5900×3100 (mm)
[Instructions for Use]: The exerciser sits on the rowing machine, feet firmly planted on the footrests, head lifted, chest open, and abdomen engaged, with eyes looking straight ahead. The torso is extended forward as much as possible, hands gripping the handles; as the upper body leans back, the arms pull backward in a smooth, alternating motion, mimicking the stroke of a rowing oar.
[Main Features]: It enhances flexibility and coordination in the arms, waist, legs, and other body parts.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct-buried type: the main upright posts are made of national-standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The main frame’s horizontal tubes are made of national-standard steel pipes with a diameter of 89 mm and a wall thickness of 3 mm; the limiting link rods have a diameter of 50 mm and a wall thickness of 5 mm.
◆ The seat’s horizontal tube is made of national‑standard steel pipe with a diameter of 60 mm and a wall thickness of 3 mm, while the footrest bar is made of steel pipe with a diameter of 48 mm and a wall thickness of 3 mm. The footrests feature anti-slip treatment, and soft end caps are installed at both ends, meeting the relevant standard requirements.
◆ The limit switch employs a double-sided impact‑type internal stop, increasing the load‑bearing area. The impact pad is made of polyurethane, offering excellent impact resistance, superior elasticity, and outstanding resistance to aging and extreme temperatures. It incorporates two high‑quality bearings, while the limit‑stop side plates are fabricated from national‑standard steel sheet, ensuring compliance with performance requirements. All exposed edges feature R2 chamfers to minimize injury in the event of impact.
◆ The seat panel is formed by stamping a 4 mm-thick cold-rolled steel sheet, with R2 chamfers around the perimeter to prevent the risk of injury from cuts.
◆ The handrail tubes are made from national‑standard steel pipes with a diameter of 42 mm and a wall thickness of 3 mm. The 42‑mm‑diameter tubing is reduced to 33 mm in diameter to facilitate the installation of handle sleeves. This approach ensures excellent structural integrity, an aesthetically pleasing appearance, ease of fabrication, and long‑term durability.
◆ The machine’s bearings are equipped with specially designed skeletal oil seals, offering excellent sealing performance, effective water and dust resistance, and long-lasting durability.
◆ The wall thickness of all connection plates for the equipment shall be no less than 8 mm.
◆ The handle grips are made of vulcanized rubber, offering a comfortable feel and excellent resistance to aging; they also feature anti-theft measures for added safety and durability.
◆ The equipment nameplate is made of stainless steel, secured with pop rivets, and its edges are tightly fitted against the upright post to prevent snagging, scratching, or other damage.
◆ The equipment has undergone relevant static load, strength load, failure load, and fatigue load tests in accordance with the GB 19272-2024 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with GB 19272-2024. Standard;
◆ The equipment features a two‑station exercise configuration, allowing simultaneous use by two users.
◆ The embedding depth of the equipment upright shall be no less than 400 mm, and the underground dimensions shall be no less than 400 × 400 × 500 mm.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and an aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface. Welding… Welding is performed using a CO₂ shielded arc welding machine with a mixed gas, resulting in aesthetically pleasing welds and straight, smooth weld beads that require no post-weld grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal and enhances the adhesion of the plastic powder coating. The electrostatic spraying process employs a two‑coat application: first, an epoxy zinc‑rich primer is applied, The exterior surface is coated with an environmentally friendly, green electrostatic powder finish. Utilizing imported electrostatic spraying equipment, the coating delivers uniform powder distribution and strong adhesion. The powder‑coated finish exhibits excellent resistance to acids and alkalis, withstands humid and hot conditions, resists aging, and offers superior corrosion protection, while maintaining an attractive appearance—making it ideal for humid environments and areas exposed to acid rain. The coating formulation contains no toxic elements. Powder recovery employs a cyclone‑type centrifugal recovery system, achieving a recovery rate of up to 98.6%, which helps conserve powder, reduce dust pollution, and ensures convenient operation while promoting energy efficiency and environmental sustainability.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts during transit and ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
