-
-
-
-
PRODUCTS
-
Big Ferris Wheel
Big Ferris Wheel
[Model]: GYX-X15
[Specification] : 1254×951×2051 (mm)
[Instructions for Use]: Hold the handle with both hands and rotate the ring in the same or opposite direction. Do not climb on or pull the ring vertically. This equipment is suitable for users of all ages.
[Main Features] : Enhance upper limb muscle strength and improve the flexibility and mobility of the shoulder girdle muscles.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct-buried type: the main upright posts are made of national-standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The main frame and upright posts are connected by flanges, with a thickness of 10 mm.
◆ The flanged connecting pipe is made of national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3.25 mm.
◆ The rotor is formed by cold‑rolling national‑standard steel tubing, while the bearing sleeve and outer ring are supported by national‑standard steel tubing; the outer ring’s steel tube has a diameter of 33 mm and a wall thickness of 2.5 mm.
◆ Internally features a wear-resistant nylon damping mechanism that regulates the turntable’s rotational speed, ensuring user safety; the bearings are… Use high-quality bearings to meet performance requirements.
◆ The machine’s bearings are equipped with specially designed skeletal oil seals, offering excellent sealing performance, effective water and dust resistance, and long-lasting durability.
◆ The equipment nameplate is secured with pop rivets, with its edges tightly aligned against the upright post to prevent snagging, scratching, or other damage.
◆ The equipment has undergone relevant static load and strength load tests in accordance with the GB 19272-2024 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with GB 19272-2024. Standard;
◆ The equipment features a two‑station exercise configuration, allowing two users to operate simultaneously.
◆ The equipment shall be buried to a depth of no less than 600 mm, and the dimensions of the underground pit shall be no less than 865 × 500 × 700 mm.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an attractive appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal and enhances the adhesion of the plastic powder coating. The electrostatic spraying process employs a two‑coat application: first, an epoxy zinc‑rich primer is applied, The exterior surface is coated with an environmentally friendly, green electrostatic powder finish. Utilizing imported electrostatic spraying equipment, the coating delivers uniform powder distribution and strong adhesion. The powder‑coated surface exhibits excellent resistance to acids and alkalis, withstands high humidity and heat, resists aging, and offers superior corrosion protection, while maintaining an attractive appearance—making it ideal for humid conditions and areas exposed to acid rain. The coating formulation contains no toxic elements. Powder recovery employs a cyclone‑type centrifugal recovery system, achieving a recovery rate of up to 98.6%, which helps conserve powder, reduce dust pollution, and ensures convenient operation while promoting energy efficiency and environmental sustainability.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts and scratches during transit, ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
