-
-
-
-
PRODUCTS
-
Square-post basketball hoop
Square-post basketball hoop
[Model]: GYX-LJ09
[Specification]: 2675X1800X3954 (mm)
[Instructions for Use]: Used in accordance with the rules and methods of basketball.
[Main Features]: For training and competition in basketball.
Category:
Product Description
◆ Embedded installation: the main upright posts are made of high‑quality, nationally‑standard steel tubing with dimensions 180×180×4 mm; the base flange is a 12‑mm‑thick steel plate. The upper crossbeam and boom are constructed from high‑quality, nationally‑standard steel tubing measuring 150×150×4 mm. The basket frame’s upper and lower tie rods are fabricated from high‑quality, nationally‑standard steel tubing with a diameter of Ф48×2.5 mm, while the rear tie rod is made from square tubing measuring 40×40×2.5 mm.
◆ The verticality of the backboard surface can be adjusted by regulating the upper tension rod; the parallelism between the hoop and the ground can be adjusted via the lower tension rod; and the verticality and parallelism of the backboard can be finely tuned by adjusting the connection point between the backboard and the support arm. The backboard is supported at five points where it connects to the main frame.
◆ Basketball backboard dimensions: 1800×1050×50 mm; the backboard’s structural dimensions comply with the requirements of Figure 1 in GB 23176-2008, Section 4.1.1. The backboard is made of SMC material, and its strength shall meet the specifications set forth in GB 19272-2024, Clause 5.5.7.
◆ The basketball backboard shall have an SMC panel with a thickness of no less than 5 mm, a flange width of no less than 50 mm, and a flange thickness of no less than 7 mm. The rear reinforcing ribs shall adopt a combined V‑shaped and grid‑type structure, with a rib thickness of no less than 6 mm and a rib height of no less than 45 mm.
◆ A reinforcing steel plate is installed on the back side of the rebound shooting area, with dimensions of 570 mm × 150 mm × 5 mm.
◆ The junction between the basketball hoop’s pivot and the backboard is reinforced with high-quality steel plates. The backboard’s embedded nuts and openings shall be waterproofed, and all connections are secured with bolts. The backboard surface must remain flat and smooth, with no deformation, delamination, or damage attributable to product quality within eight years.
◆ The basketball hoop is a compression-resistant design, horizontally mounted to the backboard. The steel plate connecting it to the frame is made of high-quality steel, secured with premium, custom‑made round-head bolts. The hoop itself is fabricated from solid round steel with a diameter of Φ18 mm and an inner diameter of 450 mm; after being subjected to pressure, it automatically returns to its original position.
◆ During installation, the backboard shall be positioned 1,200 mm from the court sideline.
◆ The installation method is embedded; it employs a five-point frame-type embedded hook with a diameter of 20 mm, buried to a depth of 900 mm. The underground footprint shall be no smaller than 800 × 800 × 1000 mm.
◆ The equipment nameplate is made entirely of stainless steel, secured with rivets, and its edges are tightly fitted against the upright posts to prevent snagging, scratching, or other damage.
◆ The entire machine has no crushing points, no shearing points, and no clamping areas; all apertures and gaps comply with the GB 19272-2024 standard.
◆ The equipment has undergone relevant static load and strength load tests in accordance with the GB 19272-2024 standard and meets the standard’s requirements.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning; the pipe-bending process employs a CNC pipe bender. Accurate angles and an aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… Welding is performed using a CO₂ shielded arc welding machine with a mixed gas, resulting in a neat weld appearance and straight weld beads, eliminating the need for grinding. Grinding, coupled with a dust collection and treatment system, purifies the workshop air to safeguard workers’ health; surface treatment employs… The shot-blasting process ensures thorough rust removal and enhances the adhesion of the powder coating. The electrostatic spraying employs a two-coat application: first, an epoxy zinc‑rich primer is applied, The exterior surface is coated with an environmentally friendly, green electrostatic powder. Utilizing imported electrostatic spraying equipment, the coating delivers uniform powder distribution and strong adhesion. The finished surface exhibits excellent resistance to acids and alkalis, withstands humid‑heat conditions, resists aging, and offers superior corrosion protection, while maintaining an attractive appearance—making it ideal for humid climates and areas prone to acid rain. The coating formulation contains no toxic elements, and a cyclone‑type centrifugal powder recovery system ensures a recovery rate of up to 98.6%, reducing material waste and minimizing dust pollution. The process is easy to operate and both energy‑efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts during transit and ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
