-
-
-
-
PRODUCTS
-
Portable basketball hoop
Portable basketball hoop
[Model]: GYX-LJ08
[Specification]: 4422X1800X3954 (mm)
[Instructions for Use]: Used in accordance with the rules and methods of basketball.
[Main Features]: For training and competition in basketball.
Category:
Product Description
◆ The boom and upright arm are fabricated from high‑quality, nationally‑standard steel tubing measuring 150×150×4 mm, while the upper and lower tie rods of the basket frame are made from premium, nationally‑standard steel tubing with dimensions of Ф48×2.5 mm.
◆ The base enclosure measures 1000 mm × 2000 mm. It shall feature an integral skeletal framework for internal support, with an external cladding of 2.3-mm steel plate. The compartment designated for ballast blocks is reinforced with 40×40×4 angle steel, and the bottom is covered with a 1.8-mm steel plate, welded integrally to the enclosure’s frame. The interior is designed to prevent water accumulation. At the junction between the enclosure and the floor, a 60×40×8 mm square tube is employed to ensure corrosion‑resistant strength at the contact interface.
◆ The uprights and the cabinet body are connected by M16 bolts, with safety guards provided on the protruding nuts.
◆ The verticality of the backboard surface can be adjusted by regulating the upper tension rod; the parallelism between the hoop and the floor can be adjusted via the lower tension rod; and the verticality and parallelism of the backboard can be finely tuned by adjusting the connection point between the backboard and the support arm. The backboard is supported at five points where it connects to the main frame.
◆ Basketball backboard dimensions: 1800×1050×50 mm. The backboard’s structural dimensions comply with the requirements of Figure 1 in GB 23176-2008, Section 4.1.1. The backboard is made of SMC material, and its strength shall meet the specifications set forth in GB 19272-2024, Clause 5.5.7.
◆ The basketball backboard shall have an SMC panel with a thickness of no less than 5 mm, a flange width of no less than 50 mm, and a flange thickness of no less than 7 mm. The rear reinforcement ribs shall adopt a combined V‑shaped and grid‑type structure, with a rib thickness of no less than 6 mm and a rib height of no less than 45 mm.
◆ A reinforcing steel plate is installed on the back side of the rebound shooting area, with dimensions of 570 mm × 150 mm × 5 mm.
◆ The junction between the basket frame’s pivot point and the backboard is reinforced with high-quality steel plates. The backboard’s embedded nuts and openings shall be waterproofed, and all connections are secured with bolts. The backboard surface must remain flat and smooth, with no deformation, delamination, or damage attributable to product quality within eight years.
◆ The basketball hoop is a compression-resistant design, horizontally mounted to the backboard. The steel plate connecting it to the frame is made of high-quality steel, secured with premium, specially designed round-head bolts. The hoop itself is constructed from solid round steel, with an inner diameter of 450 mm, and automatically returns to its original position once the applied force is removed.
◆ During installation, the backboard shall be positioned 1,200 mm from the court sideline.
◆ The equipment nameplate is made entirely of stainless steel, secured with rivets, and its edges are tightly fitted against the upright posts to prevent snagging, scratching, and other potential damage.
◆ The entire machine has no crushing points, no shearing points, and no clamping or pinching areas; all apertures and gaps comply with the GB 19272-2024 standard.
◆ The equipment has undergone relevant static load and strength load tests in accordance with the GB 19272-2024 standard and complies with the standard’s requirements.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning; the pipe-bending process employs a CNC pipe bender. Accurate angles and an aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… Subsequently, CO₂ shielded arc welding is employed in conjunction with a mixed-gas shielding process, resulting in aesthetically pleasing welds with smooth, straight bead profiles that require no post-weld grinding. The system is also equipped with a dust collection and treatment unit to purify workshop air and safeguard workers’ health. Surface preparation utilizes shot blasting, ensuring thorough rust removal and enhancing the adhesion of the powder coating. Electrostatic powder coating is applied in two coats: first, an epoxy‑rich zinc‑based primer is sprayed, The exterior surface is coated with an environmentally friendly, green electrostatic powder. Utilizing imported electrostatic spraying equipment, the coating delivers uniform powder distribution and strong adhesion. The powder‑coated finish exhibits excellent resistance to acids and alkalis, withstands humid and hot conditions, resists aging and corrosion, and maintains an attractive appearance—making it ideal for humid environments and areas prone to acid rain. The coating formulation contains no toxic elements, and a cyclone‑type centrifugal powder recovery system ensures a recovery rate of up to 98.6%, reducing material waste and minimizing dust pollution while offering convenient operation and energy efficiency.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts during transit and ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
