-
-
-
-
PRODUCTS
-
Tai Chi kneading and pushing device
Tai Chi kneading and pushing device
[Model]: GYX-L64-1
[Specification]: 1440×1172×1355 (mm)
[Instructions for Use]: Grasp the handle firmly with both hands, and slowly rotate the ring in the same or opposite direction, repeating the motion.
[Main Features]: Strengthen the shoulder girdle muscles and improve the flexibility and mobility of the shoulder, elbow, and wrist joints.
Category:
Product Description
◆ Directly buried type: the main upright posts are made of national‑standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The cantilever tubing is made of national-standard steel pipe with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The turntable is blow-molded from PP material, with a stamped raised‑dot texture on the surface to massage the palm and prevent snagging.
◆ The top of the column is sealed, with a PVC soft‑material cap molded by die‑casting and featuring a 4 mm wall thickness to prevent rainwater ingress.
◆ Internally equipped with high-quality bearings to meet performance requirements;
◆ The machine’s bearings are equipped with specially designed skeletal oil seals, offering excellent sealing performance, effective water and dust resistance, and long-lasting durability.
◆ The equipment nameplate is made of stainless steel, secured with pull rivets, and its edges are tightly fitted against the upright post to prevent snagging, scratching, or other damage.
◆ The equipment has undergone relevant static load and strength load tests in accordance with the GB 19272-2024 standard and meets the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with the GB 19272-2024 standard.
◆ The equipment features a two‑station exercise configuration, allowing two users to operate simultaneously.
◆ The equipment shall be buried to a depth of no less than 500 mm, with an underground installation dimension of no less than 400 × 400 × 600 mm.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, delivering accurate angles and an aesthetically pleasing finish. Prior to welding, the parts undergo degreasing to ensure that no oil or contaminants remain on the surface. Welding is performed with a CO₂‑shielded arc welder using a mixed gas, resulting in clean, smooth welds that require no post‑weld grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal and enhances the adhesion of the plastic powder coating. The electrostatic spraying process employs a two‑coat application: first, an epoxy zinc‑rich primer is applied, The exterior surface is coated with an environmentally friendly electrostatic powder, applied using imported electrostatic spraying equipment, ensuring uniform powder distribution and strong adhesion. The powder coating is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an attractive appearance, making it well-suited for humid and acid‑rain environments. The product’s coating formulation contains no toxic elements, and powder recovery employs a cyclone‑type centrifugal recovery system, achieving a recovery rate of up to 98.6%, which helps conserve powder, reduce dust pollution, and ensures convenient operation while being energy‑efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts and scratches during transit, ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
