-
-
-
-
PRODUCTS
-
Vibrating leg press machine
Vibrating leg press machine
[Model]: GYX-M11-1
[Specification]: 2230×130×980 (mm)
[Safe Usage Scope] ： 4250×3200 (mm)
[Instructions for Use]: The practitioner faces the equipment, stands on one leg with it fully extended, lifts and straightens the other leg, places the ankle on the crossbar, and then leans forward to press down.
[Main Features] ： Stretching the leg muscles and ligaments enhances joint flexibility and mobility, and has rehabilitative benefits for conditions such as restricted flexion and extension of the lower‑extremity joints, numbness, and muscle atrophy.
Category:
Product Description
◆ Direct‑buried design: The main upright posts are fabricated from standard rectangular galvanized steel tubing measuring 120 mm × 80 mm with a wall thickness of 3 mm. On both sides, plug‑in aluminum alloy profiles are paired with wood‑plastic composite profiles. The overall external dimensions of the upright posts shall be no less than 120 mm × 120 mm.
◆ The crossbar is made of national-standard steel tubing with a diameter of 42 mm and a wall thickness of 2.5 mm, integrally welded to the upright posts for a robust and reliable structure.
◆ The equipment nameplate is made entirely of stainless steel, secured with pull rivets, and its edges are tightly fitted against the upright posts to prevent snagging, scratching, and other potential damage.
◆ The equipment has undergone relevant static load and strength load tests in accordance with the GB 19272-2024 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with the GB 19272-2024 standard.
◆ The embedding depth of the equipment upright shall be no less than 400 mm, and the underground dimensions shall be no less than 400 × 400 × 500 mm.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. For the bending process, a CNC pipe bender is employed, delivering accurate angles and an aesthetically pleasing appearance. Prior to welding, all parts undergo degreasing to ensure that no oil or contaminants remain on the surface. Welding is performed with a CO₂‑shielded arc welder using a mixed gas, resulting in clean, smooth welds that require no post‑weld grinding. A dust collection and treatment system is also installed to purify workshop air and safeguard workers’ health. Surface treatment utilizes shot blasting, achieving thorough rust removal and enhancing the adhesion of the powder coating. Electrostatic powder coating follows a two‑coat application process, beginning with an epoxy zinc‑rich primer. The exterior surface is coated with a green, antistatic powder. Utilizing imported electrostatic spraying equipment, the coating delivers uniform powder distribution and strong adhesion. The finished surface exhibits excellent resistance to acids and alkalis, withstands humid‑heat conditions, resists aging, and maintains an attractive appearance—making it well suited for humid environments and areas prone to acid rain. The coating formulation contains no toxic elements. Powder recovery employs a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6%, which helps conserve powder, reduce dust pollution, and ensures convenient operation while promoting energy efficiency and environmental protection.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts and scratches during transit, ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
