-
-
-
-
PRODUCTS
-
Tai Chi kneading and pushing device
Tai Chi kneading and pushing device
[Model]: GYX-M05B-1
[Specification]: 1140×1054×1291 (mm)
[Safe Usage Scope] ： 3200×4100 (mm)
[Instructions for Use]: The user assumes a low, stable stance with legs slightly bent, keeps the torso upright, and presses down on the turntable with both hands while rotating the massager in the same or opposite direction.
[Main Features] ： Strengthen the shoulder girdle muscles and improve the flexibility and mobility of the shoulder, elbow, and wrist joints.
Category:
Product Description
◆ Direct‑buried design: The main upright posts are fabricated from standard rectangular galvanized steel tubing measuring 120 mm × 80 mm with a wall thickness of 3 mm. On both sides, plug‑in aluminum alloy profiles are paired with wood‑plastic composite profiles. The overall external dimensions of the upright posts shall be no less than 120 mm × 120 mm.
◆ The cross beams and cantilever tubes are made of national-standard steel pipes with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The rotary table is fully enclosed, with no snagging, and is formed in a single stamping operation between the two turntables.
◆ The top of the column is sealed, with a PVC soft‑material cap molded by die‑casting and featuring a wall thickness of 4 mm to prevent rainwater ingress.
◆ The machine’s bearings are equipped with specially designed skeletal oil seals, offering excellent sealing performance, effective water and dust resistance, and long-lasting durability.
◆ The equipment nameplate is made entirely of stainless steel, secured with rivets, and its edges are tightly fitted against the upright posts to prevent snagging, scratching, and other potential damage.
◆ The equipment has undergone relevant static load and strength load tests in accordance with the GB 19272-2024 standard and meets the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with the GB 19272-2024 standard.
◆ The equipment features a two‑station exercise configuration, allowing two users to operate simultaneously.
◆ The equipment shall be buried to a depth of no less than 500 mm, with an underground installation dimension of no less than 400 × 400 × 600 mm.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. For the bending process, a CNC pipe bender is employed, delivering accurate angles and an aesthetically pleasing finish. Prior to welding, all parts undergo degreasing to ensure that no oil or contaminants remain on the surface. Welding is performed with a CO₂‑shielded arc welder using a mixed gas, resulting in clean, smooth welds that require no post‑weld grinding. A dust collection and treatment system is also installed to purify workshop air and safeguard worker health. Surface treatment utilizes shot blasting, achieving thorough rust removal and enhancing the adhesion of the powder coating. Electrostatic powder coating follows a two‑coat application process, beginning with an epoxy zinc‑rich primer. The exterior surface is coated with an environmentally friendly, green electrostatic powder. Utilizing imported electrostatic spraying equipment, the coating delivers uniform powder distribution and strong adhesion. The powder‑coated finish exhibits excellent resistance to acids and alkalis, withstands humid and hot conditions, resists aging, and maintains an attractive appearance—making it ideal for humid environments and areas prone to acid rain. The product’s coating formulation contains no toxic elements, and a cyclonic centrifugal powder recovery system ensures a recovery rate of up to 98.6%, reducing material waste, minimizing dust pollution, and offering convenient operation while promoting energy efficiency and environmental protection.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts and scratches during transit, ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
