-
-
-
-
PRODUCTS
-
Back stretcher
Back stretcher
[Model] : GYX-L66A-1
[Specification] : 672×522×927 (mm)
[Instructions for Use]:
1. Grasp the handrails firmly with both hands and lean back against the curved backrest, then slowly bend backward to fully stretch your lower back and abdomen.
2. The exerciser sits on the back extension machine, grasps the handles firmly with both hands, simultaneously pushes up with both arms to lift the body, and raises both legs to a straight position, holding for a few seconds.
3. Grip the bar with both hands and perform inclined push-ups.
[Main Features]: Stretch the hip joints and relax the muscles of the lower back; develop upper-body support strength and core stability.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct-buried type: the main upright posts are made of national-standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The handrail bends are fabricated from national-standard steel tubing with a diameter of 42 mm and a wall thickness of 2.5 mm.
◆ The main frame’s support tubes are made of 40×80×2 mm square tubing to prevent users from getting caught and injured.
◆ The equipment panel is fabricated from 1.8 mm-thick cold-rolled steel sheet, with both sides fully enclosed by 1.8 mm-thick cold-rolled steel to prevent injury from clamps.
◆ The equipment nameplate is made of stainless steel, secured with pop rivets, and its edges are tightly fitted against the upright post to prevent snagging, scratching, and other potential damage.
◆ The equipment has undergone relevant static load and strength load tests in accordance with the GB 19272-2024 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with GB 19272-2024. Standard;
◆ The equipment features a one‑stop exercise station, allowing a single user to operate it simultaneously.
◆ The embedding depth of the equipment upright shall be no less than 400 mm, and the underground dimensions shall be no less than 400 × 400 × 500 mm.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal and enhances the adhesion of the plastic powder. The electrostatic spraying process employs a two‑coat application: first, an epoxy zinc‑rich primer is applied, The exterior surface is coated with an environmentally friendly, green electrostatic powder finish. Utilizing imported electrostatic spraying equipment, the coating delivers uniform powder distribution and strong adhesion. The powder‑coated finish exhibits excellent resistance to acids and alkalis, withstands humid‑heat conditions, resists aging, and offers superior corrosion protection, while maintaining an attractive appearance—making it ideal for humid climates and areas exposed to acid rain. The coating formulation contains no toxic elements. Powder recovery employs a cyclone‑type centrifugal recovery system, achieving a recovery rate of up to 98.6%, which helps conserve powder, reduce dust pollution, and ensures convenient operation while promoting energy efficiency and environmental sustainability.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts during transit and ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
