-
-
-
-
PRODUCTS
-
Health Riding Machine
Health Riding Machine
[Model] : GYX-L42A-1
[Specification] : 1374×451×904 (mm)
[Safe Usage Scope] ： 4400×2500 (mm)
◆ The product complies with the national standard GB 19272-2024, “General Safety Requirements for Outdoor Fitness Equipment.”
◆ Obtained a qualified test report in accordance with the national standard “General Safety Requirements for Outdoor Fitness Equipment.”
◆ Through the product quality certification issued by a nationally accredited equipment quality certification body.
Category:
Product Description
[Instructions for Use]: Sit in the seat, grip the handlebars firmly with both hands, plant both feet securely on the pedals, push down with your feet while pulling back with your hands.
[Main Features] ： Enhance cardiopulmonary function and improve muscular strength in the upper limbs, waist, abdomen, legs, and back, as well as coordination of the four limbs.
◆ Direct‑buried design: the main upright posts are made of national‑standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm, while the secondary upright posts are made of national‑standard galvanized steel pipes with a diameter of 48 mm and a wall thickness of 3 mm.
◆ The seat board and tubing are made of national-standard steel pipes with a diameter of 48 mm and a wall thickness of 3 mm.
◆ The upper limit device is connected to the main upright column using a diameter of 89 mm, wall thickness 3 For the national‑standard steel pipe, the seat board is connected to the lower end of the upright post using a 60×30×2 mm rectangular tube, forming a stable, integrated structure that ensures even load distribution and enhances the equipment’s sturdiness and durability.
◆ The handrail risers and the foot‑step cross members are fabricated from national‑standard steel pipes with a diameter of 48 mm and a wall thickness of 3 mm; the foot‑step areas feature anti‑slip treatment, and both ends are fitted with flexible end caps, in full compliance with applicable standards.
◆ The seat panel is stamped from 4 mm-thick cold-rolled steel, ensuring an 8-year service life; the perimeter features R2 rounded corners to prevent personal injury.
◆ The clearance between the bearing clips and the shaft sleeves at all locations is greater than 30 mm to prevent finger injuries.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
