-
-
-
-
PRODUCTS
-
Rowing machine
Rowing machine
[Model] ：GYX-L38A -1
[Specification] ：1198 × 1062 × 989 ( mm )
[Safe Usage Scope] ：42 00× 3100 ( mm )
◆ The product complies with the national standard GB 19272-2024, “General Safety Requirements for Outdoor Fitness Equipment.”
◆ Obtained a qualified test report in accordance with the national standard “General Safety Requirements for Outdoor Fitness Equipment.”
◆ Through the product quality certification issued by a nationally accredited equipment quality certification body.
Category:
Product Description
[Instructions for Use]: The exerciser sits on the rowing machine, feet firmly planted on the footrests, head lifted, chest expanded, and abdomen engaged, with eyes looking straight ahead. The torso is extended forward as much as possible, hands gripping the handles; as the upper body leans back, the arms pull backward in a continuous rowing motion.
[Main Features] ： It enhances flexibility and coordination in the arms, waist, legs, and other body parts.
◆ Direct-buried type: the main upright posts are made of national-standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The main frame’s horizontal tubes are made of national-standard steel pipes with a diameter of 89 mm and a wall thickness of 3 mm; the limiting link rods have a diameter of 50 mm and a wall thickness of 5 mm.
◆ The seat’s horizontal tube is made of national‑standard steel pipe with a diameter of 60 mm and a wall thickness of 3 mm; the footrest bar has a diameter of 48 mm and a wall thickness of 3 mm, with anti‑slip treatment at the double‑foot support area, and soft end caps installed at both ends, in compliance with relevant standards.
◆ The limit switch employs a double-sided impact-type internal stop, increasing the load-bearing area. The impact pad is made of polyurethane, offering excellent impact resistance, superior elasticity, and outstanding resistance to aging and extreme temperatures. It incorporates two high-quality bearings, while the limit‑stop side plates are fabricated from national‑standard steel sheet, ensuring compliance with performance requirements. All exposed edges feature R2 chamfers to minimize injury in the event of collisions.
◆ The seat panel is formed by stamping a 4 mm-thick cold-rolled steel sheet, with R2 chamfers around the perimeter to prevent the risk of cuts.
◆ The handrail tubes are made from national‑standard steel pipes with a diameter of 42 mm and a wall thickness of 3 mm. The 42‑mm‑diameter tubing is reduced to a 33‑mm diameter to facilitate the installation of the handle sleeves. This approach ensures excellent structural integrity, an aesthetically pleasing appearance, ease of fabrication, and long‑term durability.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
