-
-
-
-
PRODUCTS
-
High and low bars
High and low bars
[Model] : GYX-L15-1
[Specification] : 2815×125×2130 (mm)
[Instructions for Use] : Grip the handle with a neutral, reverse, or mixed grip, then pull upward with force, return slowly and smoothly, and repeat the movement. (Note: Minimize body sway; when gripping the handle, use a thumb‑and‑four‑fingers clasp.)
[Main Features] : Enhance the strength and flexibility of the upper limbs, back, and shoulder‑girdle muscle groups; improve the range of motion in the shoulder, elbow, wrist, and finger joints.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct‑buried design: the main upright posts are made of standard national‑standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm; the crossbar is constructed from seamless steel pipe with a diameter of 32 mm and a wall thickness of 4.5 mm.
◆ The column connections employ a disc‑topped joint design, sealing the column head to prevent rainwater ingress.
◆ The buffer layer is 300 mm thick, enhancing safety and reliability and helping to prevent accidental injuries.
◆ The embedding depth of the equipment upright shall be no less than 600 mm, and the underground dimensions shall be no less than 500 × 500 × 700 mm.
◆ The equipment nameplate is made of stainless steel, secured with pull rivets, and its edges are tightly fitted against the upright post to prevent snagging and potential injury.
◆ The top of the column is sealed, with a sealing disc thicker than 5 mm, to prevent rainwater ingress.
◆ The equipment has undergone relevant static load, strength load, and fatigue load tests in accordance with the GB 19272-2024 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with GB 19272-2024. Standard;
◆ The equipment features a two‑station exercise configuration, allowing two users to operate it simultaneously.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal and enhances the adhesion of the plastic powder coating. The electrostatic spraying process employs a two‑coat application: first, an epoxy zinc‑rich primer is applied, The exterior surface is coated with an environmentally friendly, green electrostatic powder finish. Utilizing imported electrostatic spraying equipment, the coating delivers uniform powder distribution and strong adhesion. The powder‑coated finish exhibits excellent resistance to acids and alkalis, withstands humid‑heat conditions, resists aging, and offers superior corrosion protection, while maintaining an attractive appearance—making it ideal for humid environments and areas exposed to acid rain. The coating formulation contains no toxic elements. Powder recovery employs a cyclone‑type centrifugal recovery system, achieving a recovery rate of up to 98.6%, which helps conserve powder, reduce dust pollution, and ensures convenient operation while promoting energy efficiency and environmental sustainability.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts and scratches during transit, ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
