-
-
-
-
PRODUCTS
-
Billboard
Billboard
[Model] : GYX-L07-1
[Specification] : 1046×123×1280 (mm)
[Instructions for Use]: This equipment is intended solely for pre-use warning instructions.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct-buried type: the main upright posts are made of national-standard galvanized steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The crossbeam is made of a national-standard square steel tube with dimensions 40×20 mm.
◆ The top of the column is sealed, with a PVC soft‑material cap molded by die‑casting and featuring a wall thickness of 4 mm to prevent rainwater ingress.
◆ The information panel measures 600×800 mm, and the main frame and supporting structure are fastened with pop rivets.
◆ The equipment nameplate is made of stainless steel, secured with pull rivets, and its edges are tightly fitted against the upright post to prevent snagging, scratching, or other damage.
◆ The equipment has undergone relevant static load and strength load tests in accordance with the GB 19272-2024 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with GB 19272-2024. Standard;
◆ The equipment shall be buried to a depth of no less than 500 mm, with an underground installation dimension of no less than 400 × 400 × 600 mm.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning. Prior to welding, the parts undergo degreasing treatment. Ensure that no oil or contaminants remain on the workpiece surface; welding shall be performed using a CO₂ shielded arc welder in conjunction with a mixed-gas shielding process. It features an attractive appearance, with smooth, straight weld beads that require no grinding, and is equipped with a dust collection and treatment system to purify the workshop air, ensuring… The workers are in good health, and the surface treatment employs shot blasting, ensuring thorough rust removal and enhancing the adhesion of the plastic powder. The electrostatic spraying process uses a two-coat application: first, an epoxy zinc‑rich primer is applied, The exterior surface is coated with an environmentally friendly, green electrostatic powder finish. Utilizing imported electrostatic spraying equipment, the coating delivers uniform powder distribution and strong adhesion. The powder‑coated finish exhibits excellent resistance to acids and alkalis, withstands high humidity and heat, resists aging, and offers superior corrosion protection, while maintaining an attractive appearance—making it ideal for humid conditions and areas exposed to acid rain. The coating formulation contains no toxic elements. Powder recovery employs a cyclone‑type centrifugal recovery system, achieving a recovery rate of up to 98.6%, which helps conserve powder, reduce dust pollution, and ensures convenient operation while promoting energy efficiency and environmental sustainability.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts and scratches during transit, ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
