-
-
-
-
PRODUCTS
-
GYX-LJ07 basketball hoop
GYX-LJ07 basketball hoop
[Dimensions]: 2578×1800×3954 (mm)
[Safe Operating Range]: 14,000 × 15,000 (mm)
[Instructions for Use]: Use in accordance with the rules and techniques of basketball.
[Main Features]: Designed for basketball training and competition.
Category:
Product Description
◆ The main frame is fabricated as a single, integrally bent structure using custom-made, high‑quality national‑standard steel pipes with a diameter of Φ165×4 mm. At the buried section, 100 mm above and below, 4‑mm‑thick sleeves are added to ensure structural integrity and enhance corrosion resistance. The upper and lower tension rods of the basket frame are made from high‑quality national‑standard steel pipes with a diameter of Φ48×2.5 mm.
◆ By adjusting the upper pull rod, you can regulate the verticality of the backboard surface; by adjusting the lower pull rod, you can adjust the height of the basketball hoop relative to the ground.
The parallelism can be finely adjusted by regulating the connection point between the backboard and the probe arm, ensuring both vertical and lateral alignment. The backboard and the main… The frame connection employs five-point support.
◆ Basketball backboard dimensions: 1800×1050×50 mm; the backboard’s structural dimensions comply with the requirements of Figure 1 in GB 23176-2008, Section 4.1.1. The backboard is made of SMC material, and its strength shall meet the specifications set forth in GB 19272-2024, Clause 5.5.7.
◆ The basketball backboard shall have an SMC panel with a thickness of no less than 5 mm, a flange width of no less than 50 mm, and a flange thickness of no less than 7 mm. The rear reinforcing ribs adopt a combined V‑shaped and grid‑type structure, with a rib thickness of no less than 6 mm. The reinforcing ribs… The height shall be not less than 45 mm;
◆ A reinforcing steel plate is installed on the back side of the rebound shooting area, with dimensions of 570 mm × 150 mm × 5 mm.
◆ The junction between the basketball hoop’s pivot and the backboard is reinforced with high-quality steel plates. The backboard’s embedded nuts and openings shall be protected against… Water treatment: all connections are bolted; the backboard surface must be smooth and even, and remain so for at least eight years. Deformation, delamination, or damage caused by product quality issues.
◆ The basketball hoop is a compression-resistant design, horizontally mounted to the backboard. The steel plate connecting it to the hoop frame is made of high-quality steel.
Specially manufactured round-head bolts. The basket ring is fabricated from solid round steel with a diameter of Φ18 mm, having an inner diameter of 450 mm; the basket ring is… It can automatically return to its original position after the pressure is removed.
◆ During installation, the backboard shall be positioned 1,200 mm from the court sideline.
◆ Adopt a direct‑burial installation method. The burial depth shall be no less than 900 mm, and the underground portion of the pole must be integrally connected to the above‑ground portion. Welding is prohibited; for the buried portion, the column‑to‑pipe connections shall be arranged in a cross‑shaped configuration, with burial dimensions no less than…
Fixed by concrete pouring with dimensions of 800×800×1000 mm. Soil conditions around the foundation, subgrade treatment, concrete grade, and other factors shall be in accordance with…
Implementation of the national standard.
◆ The equipment nameplate is made entirely of stainless steel, secured with rivets, and its edges are tightly fitted against the upright posts to prevent snagging, scratching, and other potential damage.
◆ The entire machine has no crushing points, no shearing points, and no clamping or pinching areas; all apertures and gaps comply with the GB 19272-2024 standard.
◆ The equipment has undergone relevant static load and strength load tests in accordance with the GB 19272-2024 standard and complies with the standard’s requirements.
◆ The components are cut using a laser cutting machine, ensuring high efficiency and precise positioning; the pipe-bending process employs a CNC pipe-bending machine. Accurate angles and an aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… Welding is performed using a CO₂ shielded arc welding machine with a mixed gas, resulting in a neat weld appearance and straight weld beads, eliminating the need for grinding. Grinding, coupled with a dust collection and treatment system, purifies the workshop air to safeguard workers’ health; surface treatment employs… The shot-blasting process ensures thorough rust removal and enhances the adhesion of the powder coating. The electrostatic spraying employs a two‑coat application: an epoxy zinc‑rich primer is applied first, followed by a green‑friendly, environmentally compliant exterior electrostatic powder coat. Equipped with imported electrostatic spray equipment, the system delivers uniform powder distribution and strong coating adhesion. The finished surface exhibits excellent resistance to acids and alkalis, withstands humid‑heat conditions, resists aging, and offers superior corrosion protection, while maintaining an attractive appearance—making it ideal for humid climates and areas prone to acid rain. The coating formulation contains no toxic elements, and a cyclone‑type centrifugal powder recovery system achieves a recovery rate of up to 98.6%, reducing material waste and minimizing dust pollution. The operation is user‑friendly, energy‑efficient, and environmentally responsible.
◆ The equipment is packaged in a double-layer system, effectively preventing impacts during transit and ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
