-
-
-
-
PRODUCTS
-
Lumbar and back massager
Lumbar and back massager
[Dimensions]: 921×747×1513 (mm)
[Safe Operating Dimensions]: 3950×2800 (mm)
[Instructions for Use]: Stand with your back to the device, grasp the handle, and press your back firmly against the massage bar. Slowly move from side to side to massage the back muscles, repeating the motion. Then, stand with your back to the device again, pressing your lower back against the massage bar, and perform up-and-down squats to massage the lower back and shoulder muscles, continuing the repeated movements.
[Main Functions]: Relaxes the muscles of the lower back and upper back, effectively alleviates muscle fatigue in the lumbar, dorsal, neck, and shoulder regions, regulates the nervous system, improves blood circulation in the lumbar and dorsal areas, unblocks meridians to promote smooth flow of qi, and helps balance the functions of related internal organs.
Category:
Product Description
◆ Directly buried type, with the main upright column adopted 120mm*80mm , wall thickness 3mm standard rectangle Galvanized Pipe material, with both sides of the uprights adopting Aluminum alloy profiles are mated with wood-plastic composite profiles, and the overall external dimensions of the uprights shall be no less than 120 mm × 120 mm.
◆ The left and right armrest tubes at the waist are made of national-standard steel tubing with a diameter of 42 mm and a wall thickness of 3 mm; the armrest handles are formed using a tube-reducing process. Reduce a 42 mm diameter pipe to a 3 mm diameter. 3 mm, to facilitate the installation of the handlebar grip; this method offers excellent structural integrity and an aesthetically pleasing appearance. Easy to process and long-lasting;
◆ The waist‑area semi‑circular tube is made of national‑standard steel pipe with a diameter of 42 mm and a wall thickness of 3 mm; the connecting tube for the waist‑back assembly has a diameter of 60 mm. National standard steel pipe with a wall thickness of 3 mm;
◆ The backrest armrest tube has a diameter of 3. 3 mm, national-standard steel pipe with a wall thickness of 2.5;
◆ The massage shaft is precision-machined to a diameter of 27 mm, ensuring a snug fit with the massage wand and smooth rotation.
◆ The top of the column is sealed. Seal Adopt PVC soft column cap, die-cast molding, wall thickness 4 Mm, avoid getting into the rainwater;
◆ A total of 6 small massage sticks are used. ， The massage wand uses Made of PVC, it features a moderately hard surface, and its massage protrusions are designed to meet the requirements of human-body massage.
◆ The handle grip is made of vulcanized rubber, offering a comfortable feel and excellent resistance to aging; it also features anti-theft measures for added safety and durability.
◆ The equipment nameplate is made entirely of stainless steel and secured with pop rivets. Fastening ， The edge is tightly fitted against the post to prevent snagging, scratching, and other damage. ；
◆ Equipment according to GB 19272-2024 The standard specifies the relevant static loads, Strength load Experiment and meets the standard requirements.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching areas; all apertures and gaps comply with… GB19272-2024 Standard;
◆ The equipment features a two‑station exercise configuration, allowing only two users at a time.
◆ The embedding depth of the equipment support column shall be no less than 500 mm, and the underground dimensions shall be no less than 4 00* 4 00*600mm;
◆ Equipment Material cutting is performed using a laser cutting machine. , high efficiency and precise positioning; the pipe-bending process utilizes a CNC pipe-bending machine, angle Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing, thorough rust removal, Enhance the adhesion of the plastic powder. Electrostatic spraying employs a two-coat process, with the epoxy zinc‑rich primer applied first, Environmentally friendly exterior surface Electrostatic powder. Using imported electrostatic powder‑coating equipment, the powder is applied evenly with strong adhesion. The coated surface is resistant to acids and alkalis, withstands humid heat, resists aging, and maintains an attractive appearance, making it suitable for humid conditions and acid rain environments. The product’s coating formulation contains no toxic elements, and powder recovery employs a cyclone‑type centrifugal recovery system, achieving a recovery rate of up to… 98.6%, saves powder and reduces dust pollution, is easy to operate, and is energy-efficient and environmentally friendly;
◆ The equipment is packaged in a double-layer system, effectively preventing impacts and scratches during transit, ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
