-
-
-
-
PRODUCTS
-
GYX-ED12B-1 Instruction Label
GYX-ED12B-1 Instruction Label
[Specification]: 2797×1357×3227 (mm)
[Instructions for Use]: This equipment is intended solely for pre-use warning instructions.
Product Description
[Main Technical Parameters]:
◆ The information panel is powered by a solar‑powered self‑generating system. When a person approaches, an infrared sensor mounted above the main frame detects their presence and automatically plays the content displayed on the panel.
◆ The equipment’s top is made of polycarbonate panels, offering a stylish and elegant appearance while providing effective shade for users.
◆ The upper frame uprights have a diameter of 88 mm and a wall thickness of 3 mm; the upper top bend is made from a 50 mm × 50 mm square tube with a wall thickness of 2 mm.
◆ The main frame and uprights are connected by flanges, with a thickness of 10 mm.
◆ The main upright posts are made of national-standard steel tubing measuring 150 mm × 120 mm with a wall thickness of 3 mm. On both sides, aluminum profiles are combined with plastic‑wood panels, and the overall external dimensions of each post are 150 mm × 150 mm.
◆ The frame steel pipes are square tubes with dimensions of 30×60 mm and a wall thickness of 1.8 mm.
◆ The information plaque is made of 304 stainless steel, with dimensions of 600 × 900 mm and a panel thickness of 1 mm. It is fastened to the main frame and supporting structure via a snap‑fit connection secured with bolts.
◆ The equipment has undergone relevant static load and stability tests in accordance with the GB 19272-2011 standard and complies with its requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with the GB 19272-2011 standard.
◆ The burial depth of the equipment’s main upright post shall be no less than 600 mm, and the underground dimensions shall be no less than 600 × 600 × 700 mm.
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… The dimensions are precise and the appearance is aesthetically pleasing. Prior to welding, the components undergo degreasing to ensure that no oil residues remain on the workpiece surfaces. Welding is performed using a CO₂‑shielded arc welder in conjunction with a mixed‑gas shielding process, producing straight, smooth weld beads that require no post‑weld grinding. A dust collection and treatment system is also installed to purify workshop air and safeguard worker health. Surface preparation employs shot blasting, achieving thorough rust removal while increasing the surface area of the workpieces and enhancing the adhesion of the powder coating. The exterior is finished with a green‑environmentally friendly electrostatic powder coating, applied using imported electrostatic spraying equipment that delivers uniform powder distribution and strong adhesion. The coated surface exhibits excellent resistance to acids and alkalis, withstands humid‑heat conditions, resists aging, and offers superior corrosion protection, making it well suited for damp environments and areas prone to acid rain. The product’s coating formulation contains no toxic elements. Powder recovery utilizes a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6%, thereby conserving material, reducing dust pollution, and ensuring convenient operation while promoting energy efficiency and environmental sustainability.
◆ The equipment is packaged in a double-layer system: thickened bubble wrap inside and strapping tape on the outside, effectively protecting it from impacts during transit and ensuring it arrives undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
