-
-
-
-
PRODUCTS
-
GYX-M71 Ski Training Device
GYX-M71 Ski Training Device
[Specification]: 1548×859×1357mm
[Safe Usage Scope] : 4600×3900mm
[Instructions for Use]: Grasp the handles on either side or at the front, place both feet on the machine’s pedals, keep your chest lifted and head held high, bend your legs naturally, and position your center of gravity below your hips. Alternate pushing with each foot to propel the pedals in a side-to-side motion, simulating skiing.
[Main Features]: Strengthens the abdominal and gluteal muscles, enhancing core stability; strengthens the leg muscles, improving lower‑body stability.
Category:
Product Description
[Main Technical Parameters]:
◆ Directly buried type: the main upright posts are made of standard rectangular tubing measuring 100 mm × 100 mm with a wall thickness of no less than 3 mm; both sides of the posts are equipped with… Use aluminum alloy profiles with a wall thickness exceeding 2 mm; additionally, the two side panels are fitted with interlocking plastic‑wood profiles, each with a wall thickness greater than 5 mm. The overall external dimensions of the column shall be no less than 128×128 mm. ；
◆ Main Frame Beam Adopt 100mm* 50 mm, with a wall thickness of no less than 3 mm High quality Rectangular tubing ；
◆ It adopts an internal limiting structure, and the impact pad is made of polyurethane material, offering excellent impact resistance, good elasticity, aging resistance, and resistance to both high and low temperatures. The maximum outer diameter is 102 mm, with a wall thickness of 5 mm, and the shaft end is connected to… Beam Welding, sleeve end and Step on the rod Welding , limit sleeve For diameter 73 mm, 7 mm wall thickness seamless pipe ; internal Adopt Four high-quality 6007 bearings, with a central shaft diameter of 35 mm, ensure compliance with impact‑test requirements; all exposed edges are chamfered with an R3 radius to minimize injury in the event of a collision.
◆ Step on the rod The connecting pipe shall be of specification: A 50×50×2.5 mm national‑standard steel tube, with a bearing housing made of a seamless pipe 50 mm in diameter and 7 mm thick; the central shaft has a diameter of 20 mm and is supported by four 6004 bearings. Pedal Connection, shaft-end sealing treatment ；
◆ The pedal is made of 3 mm thick Checkered plate , the height of the non-slip platform shall not be less than 50 mm ， Prevent personnel injuries caused by tripping or slipping; round the edges all around. R2, prevent personal injury;
◆ The handrail pipe bends use a diameter of 42 mm with a wall thickness of… 2.5 mm national standard steel pipe ；
◆ The machine’s bearings are equipped with specially designed skeletal oil seals, offering excellent sealing performance, effective water and dust resistance, and long-lasting durability.
◆ The top of the upright column is sealed, and the cap is formed by stamping 2-mm-thick steel sheet; the top is adorned with the Guiyu Xing logo. Avoid entering rainwater;
◆ The equipment nameplate is made of fully stainless steel via etching, with dimensions of 220 *80mm, with sturdy rivets and edges tightly fitted against the uprights, Avoid causing snagging injuries;
◆ The equipment has undergone relevant static load, stability, and fatigue tests in accordance with the GB 19272-2011 standard and complies with the standard requirements. Request.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment features a one‑stop exercise station and can be operated by a single user.
◆ Equipment main The embedment depth of the column shall be no less than 500 mm; the underground installation dimensions shall be no less than 500 × 500 × 600 mm. Handrail post The embedment depth shall be no less than 4 00 mm; the underground installation dimensions shall not be less than 4 00* 4 00* 5 00mm;
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an attractive appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal, increases the workpiece’s surface area, and enhances the adhesion of the powder coating. Outer surface: Forbidden City green ring Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an attractive appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone-type centrifugal separator, achieving a recovery rate of up to 98.6% and resulting in savings. The powder reduces dust pollution, is easy to handle, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: thickened bubble wrap inside and strapping tape outside, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
