-
-
-
-
PRODUCTS
-
GYX-M35 Recumbent Exercise Bike
GYX-M35 Recumbent Exercise Bike
[Specification] : 1150×600×1030 (mm)
[Safe Usage Scope]: 4150×3600 (mm)
[Instructions for Use]: Sit on the seat, holding the left and right handrails with both hands; propel the pedals to initiate rotation, while the upper limbs move in coordination with the handrails. The lower‑leg motion should be driven by pedaling, and the pace should not be too rapid.
[Main Features]: Whole-body coordinated exercise can significantly enhance cardiopulmonary function and alleviate fatigue.
Category:
Product Description
[Main Technical Parameters]:
◆ For direct‑buried installation, the main upright posts are fabricated from standard rectangular tubing measuring 100 mm × 100 mm with a wall thickness of no less than 3 mm. The sides of the posts are constructed from aluminum alloy profiles with a thickness exceeding 2 mm, while the remaining two sides utilize plug‑in composite wood‑plastic profiles with a wall thickness greater than 5 mm.
◆ The main load-bearing beams are made of national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3 mm, while the seat support tubes use standard rectangular tubing measuring 50 mm × 100 mm with a wall thickness of 2 mm.
◆ The handrail is made of national‑standard steel tubing with a diameter of 32 mm and a wall thickness of 3 mm; the armrests are fabricated from national‑standard steel tubing measuring 25 mm × 50 mm with a wall thickness of 2.5 mm. Both ends are welded to 60‑mm‑diameter shaft brackets, which are constructed from 45# round steel.
◆ The seat panel is formed by stamping a 4 mm-thick cold-rolled steel sheet, with R2 chamfers around the perimeter to prevent the risk of injury from cuts.
◆ Spindle diameter: 25 mm, equipped with two high-quality 6205 bearings; pedal axle diameter: 15 mm, fitted with four high-quality 6002 bearings.
◆ Internally, a wear-resistant nylon damping mechanism is added between the two bearings to regulate the turntable’s rotational speed, ensuring user safety. Personal safety, ensuring compliance with usage requirements;
◆ The handle cover is made of Vulcanized rubber Made of high-quality material, it feels great and is resistant to aging; additionally, it features anti-theft measures for safety and durability.
◆ The equipment nameplate is made of fully stainless steel with an etched finish, incorporates a QR code and the NSCC logo, measures 220×80 mm, and has a wall thickness of… 0.45 mm; the rivets are robust, and the edges fit tightly against the uprights to prevent snagging and injury.
◆ The equipment has undergone relevant static load and stability tests in accordance with the GB 19272-2011 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment shall be embedded to a depth of no less than 500 mm, with a pre-embedded dimension of no less than 500 × 500 × 600 mm.
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… CO₂ shielded arc welding is employed with a mixed-gas shielding atmosphere, producing aesthetically pleasing welds with smooth, straight bead profiles that require no post‑weld grinding. The process is equipped with a dust collection and treatment system to purify workshop air and safeguard worker health. Surface preparation utilizes shot blasting, ensuring thorough rust removal, increasing the workpiece’s surface area, and enhancing the adhesion of the powder coating. The exterior surface is coated with a green, environmentally friendly electrostatic powder from the Forbidden City, applied using imported electrostatic spraying equipment. This ensures uniform powder distribution and strong adhesion. The coating is resistant to acids and alkalis, withstands high humidity and heat, resists aging and corrosion, and maintains an attractive appearance—making it ideal for humid conditions and areas prone to acid rain. The product’s paint formulation contains no toxic elements, and the powder recovery system employs a cyclone‑type centrifugal separator, achieving a recovery rate of up to… 98.6%, saves powder and reduces dust pollution, is easy to operate, and is energy-efficient and environmentally friendly;
◆ The equipment is packaged in a double-layer system: thickened bubble wrap inside and strapping tape outside, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
