-
-
-
-
PRODUCTS
-
GYX-M25 Instruction Plate
GYX-M25 Instruction Plate
[Specification] : 865×128×1471 (mm)
[Safe Usage Scope]: 4000×3130 (mm)
[Instructions for Use] : This equipment is intended solely for pre-use warning instructions.
[Main Features] — —
Category:
Product Description
[Main Technical Parameters]:
◆ Directly buried type: the main upright posts are made of standard rectangular tubing measuring 100 mm × 100 mm with a wall thickness of no less than 3 mm; both sides of the posts are equipped with… Use aluminum alloy profiles with a wall thickness exceeding 2 mm; additionally, the two side panels are fitted with interlocking plastic‑wood profiles, each with a wall thickness greater than 5 mm. The overall external dimensions of the column shall be no less than 128 × 128 mm.
◆ The crossbeam is made of angle steel with dimensions 30×30 mm and a wall thickness of 3 mm.
◆ The frame steel pipes are square tubes with dimensions of 30×60 mm and a wall thickness of 1.8 mm.
◆ The information plaque is made of 304 stainless steel, with a corrosion-resistant finish, measuring 600×800 mm. It includes a QR code and the NSCC logo, with dimensions… Measuring 220×80 mm with a wall thickness of 0.45 mm, the rivets are robust, and the edges fit tightly against the upright posts to prevent snagging and injury; connected… The connection method employs a main frame and a supporting framework to clamp the center, secured with stainless steel anti-theft bolts.
◆ The equipment has undergone relevant static load, stability, and fatigue tests in accordance with the GB 19272-2011 standard and complies with the standard requirements. Request.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment shall be embedded to a depth of no less than 400 mm, with an underground installation dimension of no less than 400 × 400 × 500 mm.
◆ The components are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. Prior to welding, the components undergo degreasing treatment. Ensure that no oil or contaminants remain on the workpiece surface; welding shall be performed using a CO₂‑shielded arc welder in conjunction with a mixed‑gas shielding process. It features an attractive appearance, with smooth, straight weld beads that require no grinding, and is equipped with a dust collection and treatment system to purify the workshop air, ensuring… Ensures the worker’s health; surface treatment is performed using shot blasting, achieving thorough rust removal, increasing the workpiece’s surface area, and enhancing… Adhesion of plastic powder, The exterior surface is coated with a green, environmentally friendly electrostatic powder from the Forbidden City, applied using imported electrostatic spraying equipment, ensuring uniform powder output. Uniform, with strong powder adhesion; the plastic surface is resistant to acids and alkalis, withstands high humidity and heat, resists aging and corrosion, and boasts an attractive appearance—ideal for humid environments. In wet and acid‑rain environments, the product’s coating formulation contains no toxic elements, and powder recovery is carried out using a cyclone‑type centrifugal separator. Recycling system with a recovery rate of up to 98.6%, reducing powder waste and minimizing dust pollution; easy to operate, energy-efficient, and environmentally friendly.
◆ The equipment is packaged in a double-layer system: thickened bubble wrap inside and strapping tape outside, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
