-
-
-
-
PRODUCTS
-
GYX-M14 Parallel Bars
GYX-M14 Parallel Bars
[Specification]: 2400×778×1459 (mm)
[Safe Usage Scope]: 5400×3800 (mm)
[Instructions for Use]: Grasp the bar with both hands, exert force with both arms to lift your body, then perform elbow bends and straight-arm extensions (dips), repeating the movement.
[Main Features]: Enhance the strength and flexibility of the upper limbs, shoulder girdle, chest, abdomen, and back muscles; provide stability to the upper‑limb joints; and improve coordination and balance.
Category:
Product Description
Enhance the strength and flexibility of the upper limbs, shoulder girdle, chest, abdomen, and back muscles; provide stability to the upper‑limb joints; and improve coordination and balance.
[Main Technical Parameters]:
◆ Direct‑buried type: the main upright posts are made of standard rectangular tubing measuring 100 mm × 100 mm with a wall thickness of no less than 3 mm; both sides of the posts are equipped with… Use aluminum alloy profiles with a wall thickness exceeding 2 mm; additionally, the two side panels are fitted with interlocking plastic‑wood profiles, each with a wall thickness greater than 5 mm. The overall external dimensions of the column shall be no less than 128 × 128 mm.
◆ The support tubes are 48 mm in diameter and 3 mm thick, conforming to the national standard. A 4‑mm‑thick arc‑shaped support plate is mounted atop the tubes. At the top of each column, a 130 mm × 130 mm steel plate, 6 mm thick, caps the column head to prevent rainwater ingress. Chamfers with an R3 radius are provided around the perimeter. The horizontal crossbars are 48 mm in diameter and 3 mm thick, meeting the national standard, with a length of 2,400 mm. They are secured to the arc‑shaped support plates using eight M10 stainless‑steel anti‑theft bolts. A lock washer is added at the base to prevent loosening. The spacing between the two crossbars is 566 mm, and the height from the ground is 1,435 mm, in compliance with national standards.
◆ The equipment nameplate is made of fully stainless steel with a corrosion-resistant finish, incorporates a QR code and the NSCC logo, measures 220×80 mm, and has a wall thickness of… 0.45 mm; the rivets are robust, and the edges fit tightly against the uprights to prevent snagging and injury.
◆ The equipment has undergone relevant static load and stability tests in accordance with the GB 19272-2011 standard and complies with its requirements.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The embedding depth of the equipment uprights shall be no less than 500 mm, and the underground dimensions shall be no less than 600 × 600 × 600 mm.
◆ The buffer layer is 200 mm thick, enhancing safety and reliability and helping to prevent accidental injuries.
◆ The components are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. Prior to welding, the components undergo degreasing treatment. Ensure that no oil or contaminants remain on the workpiece surface; welding shall be performed using a CO₂ shielded arc welder in conjunction with a mixed-gas shielding process. It features an attractive appearance, with smooth, straight weld beads that require no grinding, and is equipped with a dust collection and treatment system to purify the workshop air, ensuring… The worker is in good health, and the surface treatment employs shot blasting, ensuring thorough rust removal, increasing the workpiece’s surface area, and enhancing… Adhesion of plastic powder, The exterior surface is coated with a green, environmentally friendly electrostatic powder finish, applied using imported electrostatic spraying equipment, ensuring uniform powder distribution. Uniform, with strong powder adhesion; the plastic surface is resistant to acids and alkalis, withstands high humidity and heat, resists aging and corrosion, and boasts an attractive appearance—ideal for humid environments. In wet and acid‑rain environments, the product’s coating formulation contains no toxic elements, and powder recovery is carried out using a cyclone‑type centrifugal separator. Recycling system with a recovery rate of up to 98.6%, reducing powder consumption and minimizing dust pollution; easy to operate, energy-efficient, and environmentally friendly.
◆ The equipment is packaged in a double-layer system: internally wrapped with thickened bubble wrap and externally secured with strapping, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
