-
-
-
-
PRODUCTS
-
GYX-LJ08 Mobile Basketball Hoop
GYX-LJ08 Mobile Basketball Hoop
[Specification]: 4518×1800×3948 (mm)
[Safe Usage Scope]: 14000×15000 (mm)
[Instructions for Use]: Used in accordance with the rules and methods of basketball.
[Main Features]: For training and competition in basketball.
Category:
Product Description
For training and competition in basketball.
[Main Technical Parameters]:
◆ Specifications of the probe arm and force arm 150×150×4 national-standard high-quality steel pipe; the upper and lower pull rods of the basketball hoop are made of Ф48×3mm. High-quality national-standard steel pipe.
◆ The base cabinet has dimensions of 1000 mm × 2000 mm, The base cabinet shall be supported by an integral frame, and the exterior shall adopt… 2.2mm Steel plate cladding, The position for placing the counterweight within the enclosure is adopted as 20×30 square tube support, with a 2.2 mm steel plate covering the surface, It is integrally welded to the cabinet frame, with no water‑retaining structure inside the cabinet.
◆ By adjusting the upper pull rod, you can regulate the verticality of the backboard surface; by adjusting the lower pull rod, you can adjust the height of the hoop relative to the ground. The parallelism can be finely adjusted by regulating the connection point between the backboard and the probe arm, ensuring both vertical and lateral alignment. The backboard and the main… The frame connection employs five-point support.
◆ Basketball backboard dimensions: 1800*1050*50 mm; the structural dimensions comply with the requirements of GB 19272-2011, clause 5.12.1.3. The basketball backboard shall be made of SMC material, and its strength shall comply with the requirements specified in GB 19272-2011, clause 6.12.1.1.3.
◆ Basketball backboard The SMC panel shall have a thickness of not less than 5 mm, with a flange width of not less than 50 mm and a flange thickness of not less than 7 mm. The rear reinforcing ribs adopt a combined V‑shaped and grid‑type structure, with a rib thickness of no less than 6 mm. The reinforcing ribs… The height shall be not less than 45 mm;
◆ A reinforcing steel plate is installed on the back of the rebounding area, with dimensions of: 570 mm × 150 mm × 5 mm
◆ The junction between the basketball hoop’s pivot and the backboard is reinforced with high-quality steel plates. The backboard’s embedded nuts and any drilled openings shall be protected against… Water treatment: all connection parts use rust‑proof bolts and anti‑theft caps; the backboard surface must be kept smooth and even, with no deformation or damage for at least eight years. Deformation, delamination, or damage caused by product quality issues.
◆ The basketball hoop is a compression-resistant design, horizontally mounted to the backboard. The steel plate connecting it to the hoop frame is made of high-quality steel. High-quality… Specially manufactured round-head bolts. The basket ring is fabricated from solid round steel with a diameter of Φ18 mm, and its overall circular diameter is 468 mm; the basket ring is… It can automatically return to its original position after the pressure is removed.
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning; the pipe-bending process employs a CNC pipe bender. Accurate angles and an aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… Welding is performed using a CO₂ shielded arc welding machine with a mixed gas, resulting in a neat weld appearance and straight weld beads, eliminating the need for grinding. Grinding, coupled with a dust collection and treatment system, purifies the workshop air to safeguard workers’ health; surface treatment employs… Using shot blasting, rust is thoroughly removed, the workpiece’s surface area is increased, and the adhesion of the powder coating is enhanced. Outer surface: Forbidden City green Eco-friendly electrostatic powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution, strong adhesion, and acid-resistant surface finish. Alkali-resistant, resistant to damp heat, aging‑resistant, corrosion‑resistant, and aesthetically pleasing; suitable for humid and acid‑rain environments; the product’s coating formulation… The formulation contains no toxic elements, and powder recovery is carried out using a cyclone-type centrifugal powder recovery system, achieving a recovery rate of up to 98.6%. It saves powder, reduces dust pollution, is easy to operate, and is energy-efficient and environmentally friendly.
◆ The equipment nameplate is made of fully stainless steel with a corrosion-resistant finish, measuring 220×80 mm; it is secured with rivets for robustness, and its edges fit tightly against the upright post. Avoid causing snagging injuries;
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment has undergone the relevant static load stability tests in accordance with GB 19272-2011 and complies with the standard’s requirements.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping tape, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
