-
-
-
-
PRODUCTS
-
GYX-L89 Finger Exercise Signboard Set
GYX-L89 Finger Exercise Signboard Set
[Specification]: 928×114×1869 (mm)
[Safe Usage Scope]: 4000*3150 (mm)
[Instructions for Use]: 1. Place your fingers inside the PE‑board’s striped compartment and move them up and down; 2. Warnings and instructions prior to using the equipment.
[Main Features]: Enhance finger dexterity and coordination.
Category:
Product Description
[Main Technical Parameters]:
◆ Equipment Main column: directly buried, The main column uses a diameter of 114 mm, wall thickness 3 mm, national standard steel pipe 。
◆ The finger exercise area uses Crafted from PE material, it has a total thickness of 19 mm and an engraving depth of 5 mm, with rounded edges around the perimeter to ensure user safety.
◆ Back of the equipment The information plaque uses Corrosion of 304 stainless steel, with dimensions of 700*9 00 m, wall thickness 1.2 mm, connection method Stainless steel rivets ensure a strong and secure joint. ；
◆ The equipment features 1 piece Exercise position, Can at the same time 1 Used simultaneously by people;
◆ The embedding depth of the equipment upright shall be no less than 500 mm, the underground installation dimensions shall not be less than 500*500*600 mm;
◆ The equipment nameplate is made of fully stainless steel with an etched finish, measuring 220×80 mm; it is secured with rivets for robustness, and its edges fit tightly against the upright post. Avoid causing snagging injuries;
◆ The top of the column is sealed to prevent rainwater from entering.
◆ The equipment has undergone relevant static load and stability tests in accordance with the GB 19272-2011 standard and complies with its requirements.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight, smooth bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal, increases the workpiece’s surface area, and enhances the adhesion of the powder coating. Outer surface: Forbidden City green ring Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an attractive appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6% and resulting in significant savings. The powder reduces dust pollution, is easy to handle, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping tape, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
