-
-
-
-
PRODUCTS
-
GYX-L78 Push-Up Rack
GYX-L78 Push-Up Rack
[Specification]: 1298×648×626 (mm)
[Safe Usage Scope]: 4400×3800 (mm)
[Instructions for Use]: Grasp the support frame firmly with both hands, adjust it to an appropriate height, keep your body upright and bend your arms, lowering your body in a straight line until your shoulders and elbows are at the same horizontal level. Then, push yourself back up in a straight line to return to the starting position—this completes one repetition; record the number of repetitions.
[Main Features]: Enhance upper limb, shoulder, and back muscle strength and endurance.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct-buried type; the main frame is constructed from national-standard steel pipes with a diameter of 48 mm and a wall thickness of 3 mm.
◆ The distance between the highest points of the two main frames is 600 mm from the ground; the transverse width of each main frame column is 1,250 mm, and the spacing between the two main frames is 600 mm. It conforms to human anatomy, making it more convenient to use.
◆ The equipment shall be buried to a depth of no less than 400 mm, with an underground installation dimension of no less than 400 × 400 × 500 mm.
◆ The equipment nameplate is made of fully stainless steel with a corrosion-resistant finish, measures 220×80 mm, features robust rivets, and has edges that fit tightly against the upright post. Avoid causing snagging injuries;
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment features a one‑stop exercise station, and only one person may use it at a time.
◆ The equipment has undergone relevant static load stability tests in accordance with the GB 19272-2011 standard and complies with the standard’s requirements.
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil residues remain on the workpiece surface, followed by welding. Welding is performed using a CO₂ shielded arc welder with a mixed gas, resulting in aesthetically pleasing welds with straight, smooth beads that require no post-weld grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing, thorough rust removal, increased workpiece surface area, and enhanced adhesion of the plastic powder. Outer surface: Forbidden City green ring Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an attractive appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone-type centrifugal separator, achieving a recovery rate of up to 98.6% and resulting in significant savings. The powder reduces dust pollution, is easy to handle, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping tape, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
