-
-
-
-
PRODUCTS
-
GYX-L73 Continuous Jump
GYX-L73 Continuous Jump
[Specification]: 2845×472×160 (mm)
[Safe Usage Scope]: 5850×3600 (mm)
[Instructions for Use]: The user stands with feet together, slightly bends the knees to absorb the impact, and performs continuous jumps, leaping from one side to the other until the entire length has been covered.
[Main Features]: Enhance lower-body strength, improve overall body coordination, and promote calm and controlled movement.
Category:
Product Description
[Main Technical Parameters]:
◆ The main columns and frames are all fabricated by welding national-standard steel pipes with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The main frame bend has a length of 2,790 mm, a width of 470 mm, and an arc radius of 275 mm; the center of the main frame bend is 130 mm above the ground. It conforms to human biomechanics and is suitable for users to perform jumping exercises.
◆ The equipment nameplate is made of fully stainless steel with an etched finish, measuring 220×80 mm; it is secured with rivets for robustness, and its edges fit tightly against the upright post. Avoid causing snagging injuries;
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment features a one-stop exercise station, allowing for simultaneous use by a single user.
◆ The embedding depth of the equipment upright shall be no less than 400 mm, and the underground dimensions shall be no less than 400 × 400 × 500 mm.
◆ The equipment has undergone relevant static load stability tests in accordance with the GB 19272-2011 standard and complies with the standard’s requirements.
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an attractive appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal, increases the workpiece’s surface area, and enhances the adhesion of the powder coating. Outer surface: Forbidden City green ring Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an attractive appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6% and resulting in significant savings. The powder reduces dust pollution, is easy to handle, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: internally wrapped with thickened bubble wrap and externally secured with strapping, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
