-
-
-
-
PRODUCTS
-
GYX-L67 Circular Upper Limb Coordination Trainer
GYX-L67 Circular Upper Limb Coordination Trainer
[Specification]: 1052×842×1719 (mm)
[Safe Usage Scope]: 4100×3900 (mm)
[Instructions for Use]: Hold the balance handle with one hand and move it along the circular bent tube, ensuring that the balance handle’s ring does not come into contact with the tube during movement.
[Main Features] : Train upper‑limb stability and coordination, enhance finger dexterity, strengthen upper‑limb mobility, and promote fine motor skills.
Category:
Product Description
[Main Technical Parameters]:
◆ Directly buried type; the main upright posts are made of national-standard steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The circular bend uses a diameter of 42 mm, wall thickness 3 mm national standard steel pipe , maximum outer diameter of the circular bend 1052 mm, divided into three tiers—upper, middle, and lower—with a 410-mm spacing between each tier. The lowest tier is 735 mm above the floor, and the upper tier is 1555 mm above the floor. It is securely and reliably fastened to the main upright post using bolts. ；
◆ The balance handle is yellow. Made of PVC, it is resistant to aging and extreme temperatures, ensuring a long service life. ；
◆ The equipment nameplate is made of fully stainless steel with a corrosion-resistant finish, measures 220×80 mm, features robust rivets, and has edges that fit tightly against the upright post. Avoid causing snagging injuries;
◆ The equipment has undergone relevant static load, stability, impact, and fatigue tests in accordance with the GB 19272-2011 standard and complies with it. Standard requirements.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment features a one-stop exercise station and can be used by a single user at the same time.
◆ The embedding depth of the equipment upright shall be no less than 5 00 mm; the underground installation dimensions shall not be less than 50 0* 5 00* 6 00mm;
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or grease remains on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an attractive appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal, increases the workpiece’s surface area, and enhances the adhesion of the powder coating. Outer surface: Forbidden City green ring Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an attractive appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6% and resulting in significant savings. The powder reduces dust pollution, is easy to handle, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
