-
-
-
-
PRODUCTS
-
GYX-L45 Pendulum Waist Twister
GYX-L45 Pendulum Waist Twister
[Specification] : 1445×902×1223mm
【 [Safe Usage Scope] : 4450×3900 (mm)
[Instructions for Use] : Waist Twister: Grip the handles firmly with both hands, stand balanced on the circular footplate or crouch on the twisting disc, and use your core to drive your lower limbs or entire body in a side-to-side twisting motion. Wave Board: Face the equipment, grasp the handles tightly with both hands, place your feet on the footplate, and engage your core to propel your lower limbs in a lateral swinging motion.
[Main Features] It enhances cardiopulmonary function, strengthens the muscles of the lower back and abdomen, and improves coordination; it also increases the flexibility and mobility of the lumbar spine and hip joints, helping to achieve a toned, well‑proportioned physique. Large‑amplitude rotational movements of the waist can both tense and relax the lumbar muscles, unblock meridians, promote the smooth flow of qi and blood, and fortify the lower back while strengthening the kidneys.
Category:
Product Description
[Main Technical Parameters]:
◆ Directly buried type; the main upright posts are made of national-standard steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The boom pipe is made of national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3 mm; at the handrail, a reducing‑tube technique is employed to decrease the diameter to 42 mm. The pipe diameter is reduced to 32 mm to facilitate the installation of the sleeve; this approach ensures excellent structural integrity, an aesthetically pleasing appearance, and ease of fabrication. Durable and long-lasting, the support tube is made of national-standard steel pipe with a diameter of 32 mm and a wall thickness of 2.5 mm.
◆ The seat plate is stamped from 4 mm-thick steel sheet, ensuring an 8-year service life; its perimeter features R2 rounded corners to prevent personal injury.
◆ The swivel base is stamped from 4 mm-thick cold-rolled steel, ensuring an 8-year service life; it measures 300 mm in diameter, 22 mm in height, with a chamfered edge around the perimeter. Rounded corners with a radius of 2 mm; textured, non-slip surface to prevent slipping.
◆ The internal mechanism of the rotating waist features a damping structure to regulate rotational speed, ensuring user safety; the bearings are high-quality 6205. Bearing, with a central shaft diameter of 25 mm, ensuring compliance with operational requirements.
◆ The limit switch employs a cast steel internal limiting structure, and the impact pad is made of polyurethane material, offering excellent impact resistance, superior elasticity, and outstanding aging resistance. Resistant to high and low temperatures, with a maximum outer diameter of 102 mm, a wall thickness of 4 mm, the shaft end welded to the upright column, and the sleeve end welded to the swing leg. Equipped with high-quality 6007 bearings and a central shaft diameter of 35 mm, it meets the requirements of impact testing and features limit stops to restrict lateral swing. The single‑sided swing angle is less than 65°, and all exposed edges are chamfered with an R3 radius to reduce injury in the event of impact.
◆ The machine’s bearings are equipped with specially designed skeletal oil seals that provide excellent sealing, effectively preventing water and dust ingress for long-lasting durability.
◆ The footboard is stamped from 4-mm-thick steel plate, with anti-slip features at the double‑foot‑contact area; the height of the anti‑slip platform shall be no less than 30 mm. To prevent injuries caused by tripping or slipping, the perimeter is chamfered with an R2 radius, and anti‑collision rubber pads are installed on both sides of the tread to protect users. Harm;
◆ The top of the upright post is sealed, and the cap is formed by stamping 2-mm-thick steel plate; the top is adorned with the Guiyu Xing logo. Avoid entering rainwater;
◆ The equipment nameplate is made of fully stainless steel with an etched finish, measuring 220×80 mm; it is secured with rivets for durability, and its edges fit tightly against the upright post. Two… The QR‑code signage is made entirely of stainless steel, with dimensions of 90 × 60 mm and a wall thickness of 0.8 mm, to prevent snagging injuries.
◆ The equipment has undergone relevant static load, stability, and fatigue tests in accordance with the GB 19272-2011 standard and complies with the standard requirements. Request.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment features a two‑station exercise configuration, allowing two users to operate it simultaneously.
◆ The embedding depth of the equipment upright shall be no less than 500 mm, and the underground dimensions shall be no less than 500 × 500 × 600 mm.
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface, followed by welding. Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal, increases the workpiece’s surface area, and enhances the adhesion of the powder coating. Outer surface: Forbidden City green ring Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an attractive appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6% and resulting in cost savings. The powder reduces dust pollution, is easy to handle, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping tape, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
