-
-
-
-
PRODUCTS
-
GYX-L41 Stepper Machine
GYX-L41 Stepper Machine
[Specification]: 1600×676×1362mm
[Safe Usage Scope]: 4600×3700 (mm)
[Instructions for Use]: The user stands on the footboard, grips the handles firmly with both hands, and coordinates their movements: as the footboard swings, the handles swing in tandem. One hand pushes the handle forward while the other pulls it backward, repeating the motion.
[Main Features]: It strengthens the muscles of the upper limbs, core, and lower limbs, enhances hand–foot coordination, and improves cardiovascular and pulmonary function.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct‑buried type: the front and rear uprights are made of national‑standard steel pipes with a diameter of 88 mm and a wall thickness of 3 mm.
◆ The main column and beam are fabricated from national-standard steel tubing with a diameter of 76 mm and a wall thickness of 3 mm; the main frame’s axial pipe has a diameter of 102 mm and a wall thickness of… A 5 mm national‑standard steel pipe, with a shaft diameter of 28 mm; the spindle sleeve is made from a seamless tube with an outer diameter of 88 mm and a wall thickness of 2.5 mm. Enhance the equipment’s strength and load-bearing capacity;
◆ The handrail has a diameter of 32 mm and a wall thickness of… 3 MM national-standard steel pipe, with a connecting rod diameter of 42 mm, wall thickness of 2.5 mm, and handrail. The upper and lower bearing sleeves are made of seamless tubes with diameters of 60 mm and 50 mm, respectively, and wall thicknesses of 7 mm, each utilizing four high-quality components. Bearing 6205 and four high-quality 6004 bearings are used, respectively;
◆ The pedal‑rod linkage is fabricated from 40×40×2.5 square tubing, while the axle sleeve is made of seamless tubing with a 60 mm diameter and a wall thickness of 7 mm.
◆ The foot pedal is stamped from 4-mm-thick cold-rolled steel, ensuring an 8-year service life and featuring anti-slip measures to prevent slipping during use.
Personnel injury, with the height of the edge around the pedal exceeding 30 mm, with a fillet radius of R2 around the perimeter to prevent personal injury;
◆ The upper and lower bearing sleeves of the rear swing arm are made from seamless tubes with diameters of 60 mm and 50 mm, respectively, and wall thicknesses of 7 mm, each employing four… One high-quality 6205 bearing and four high-quality 6004 bearings, respectively;
◆ The spindle is machined from 28 mm diameter round steel, with a bearing seat diameter of 25 mm.
◆ The machine’s bearings are equipped with specially designed skeletal oil seals that provide excellent sealing, effectively preventing water and dust ingress for long-lasting durability.
◆ The equipment nameplate is made of fully stainless steel with an etched finish, measuring 220×80 mm. It is secured with rivets for robustness, and its edges fit tightly against the upright post, avoiding… Prevent snagging injuries;
◆ The equipment has undergone relevant static load, stability, impact, and fatigue tests in accordance with the GB 19272-2011 standard and complies with it. Standard requirements.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching areas; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment features a one-stop exercise station and can be used by a single user at the same time.
◆ The embedding depth of the equipment upright shall be no less than 400 mm, and the underground dimensions shall be no less than 400 × 400 × 500 mm.
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface. Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal, increases the workpiece’s surface area, and enhances the adhesion of the powder coating. Outer surface: Forbidden City green ring Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an attractive appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone-type centrifugal separator, achieving a recovery rate of up to 98.6% and resulting in savings. The powder reduces dust pollution, is easy to handle, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping tape, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
