-
-
-
-
PRODUCTS
-
GYX-L30C Pull-up Bar
GYX-L30C Pull-up Bar
[Specification]: 1469×1307×2304 (mm)
[Safe Usage Scope]: 5550×5400 (mm)
[Instructions for Use]: Grasp the handle firmly with both hands, using a pronated, supinated, or mixed grip, and pull upward with force; then slowly return to the starting position and repeat the movement.
[Main Features]: Enhance the strength and flexibility of the upper limbs, back, and shoulder‑girdle muscle groups; improve the range of motion in the shoulder, elbow, wrist, and finger joints.
Category:
Product Description
[Main Technical Parameters] ：
◆ Directly buried type; the main upright posts are made of national-standard steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The large scaffolding system utilizes standard seamless pipes with a diameter of 128 mm and a wall thickness of 6 mm, ensuring robustness and durability; three main frame tubes are evenly distributed around the perimeter. The main frame tubes are made of national‑standard steel pipes with a diameter of 76 mm and a wall thickness of 3 mm, while the handrails are constructed from national‑standard steel pipes measuring 32 mm in diameter and 3 mm thick.
◆ The handle grip is made of Vulcanized rubber Made of high-quality material, it offers a pleasant tactile experience and excellent resistance to aging; additionally, it features anti-theft measures for enhanced safety and durability.
◆ The equipment nameplate is made of fully stainless steel with an etched finish, measuring 220×80 mm. It is secured with rivets for robustness, and its edges fit tightly against the upright post, avoiding… Prevent snagging injuries;
◆ The equipment has undergone relevant static load, stability, and fatigue tests in accordance with the GB 19272-2011 standard and complies with the standard requirements. Request.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment features a two‑station exercise configuration, allowing two users to operate simultaneously.
◆ The equipment shall be buried to a depth of no less than 900 mm, with an underground installation dimension of no less than 500 × 500 × 1000 mm.
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface. Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an attractive appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing ensures thorough rust removal, increases the workpiece’s surface area, and enhances the adhesion of the powder coating. Outer surface: Forbidden City green ring Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an aesthetically pleasing appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6% and resulting in significant savings. The powder reduces dust pollution, is easy to handle, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping tape, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
