-
-
-
-
PRODUCTS
-
GYX-L19A Flexibility Trainer
GYX-L19A Flexibility Trainer
[Specification]: 1306×322×577mm
[Safe Usage Scope]: 4400×3400 (mm)
[Instructions for Use]: The user sits on the seat, places both feet on the footrests beneath the equipment, extends the legs, engages the core, keeps the torso naturally upright, and brings the arms together before forcefully reaching forward to touch the scale at the top of the trainer, thereby performing a trunk flexion–extension exercise.
[Main Features]: It enhances bodily flexibility, improves the agility and coordination of all muscles, strengthens the muscular tension in the lower back and spine, and boosts the strength and flexibility of the muscles in the waist, back, and abdomen.
Category:
Product Description
[Main Technical Parameters]:
◆ Embedded installation: the main upright posts and seat upright posts are made of national-standard steel tubing with a diameter of 88 mm and a wall thickness of 3 mm.
◆ The cross beams are made of national-standard steel tubing with dimensions 20×30 mm and a wall thickness of 2 mm; the corners where the cross beams connect feature R25 mm rounded arcs.
◆ The disc at the top of the column is fabricated from a steel plate with a diameter of 100 mm and a wall thickness of 6 mm, and is connected to the support tube, which is specified as… 25×25×2 mm national‑standard steel tubing, with the distance between the top disc of the upright post and the panel exceeding 30 mm, in compliance with national standards.
◆ The seat is formed by stamping a 4-mm-thick cold-rolled steel sheet, with R2 chamfers around the perimeter; the footrest is fabricated by bending a 4-mm checkered plate. It is finished with a non-slip surface and features 2 mm edge chamfers to prevent the risk of cuts.
◆ The panel surface is made of fully stainless steel with a corrosion-resistant finish, 1 mm thick; the edges are folded over, and the contact surfaces facing the human body feature R2 mm chamfers, seamlessly integrated with the main frame. Joining is accomplished by riveting with pop rivets;
◆ The equipment nameplate is integrated with the panel surface for corrosion resistance, making it easy for users to read. The QR‑code identification plate is fully etched in stainless steel. Dimensions: 90 × 60; wall thickness: 0.8 mm, to prevent snagging and injury.
◆ The equipment has undergone relevant static load and stability tests in accordance with the GB 19272-2011 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment features a one‑station exercise position and is intended for single‑user operation only.
◆ The embedding depth of the equipment upright shall be no less than 400 mm, and the underground dimensions shall be no less than 400 × 400 × 500 mm.
◆ The components are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. Prior to welding, the components undergo degreasing treatment. Ensure that no oil or contaminants remain on the workpiece surface; welding shall be performed using a CO₂ shielded arc welder in conjunction with a mixed-gas shielding process. It features an attractive appearance, with smooth, straight weld beads that require no grinding, and is equipped with a dust collection and treatment system to purify the workshop air, ensuring… The worker is in good health, and the surface treatment employs shot blasting, ensuring thorough rust removal, increasing the workpiece’s surface area, and enhancing… Adhesion of plastic powder, The exterior surface is coated with a green, environmentally friendly electrostatic powder finish, applied using imported electrostatic spraying equipment, ensuring uniform powder distribution. Uniform, with strong powder adhesion; the plastic surface is resistant to acids and alkalis, withstands high humidity and heat, resists aging and corrosion, and boasts an attractive appearance—ideal for humid environments. In wet and acid‑rain environments, the product’s coating formulation contains no toxic elements, and powder recovery is achieved using a cyclone‑type centrifugal separator. Recycling system with a recovery rate of up to 98.6%, reducing powder waste and minimizing dust pollution; easy to operate, energy-efficient, and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping tape, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
