-
-
-
-
PRODUCTS
-
GYX-L18 Pommel Horse Trainer
GYX-L18 Pommel Horse Trainer
[Specification]: 2070×540×785mm
[Safe Usage Scope]: 5100×3600 (mm)
[Instructions for Use]: Grasp the handles on either side of the pommel horse trainer with both hands, lift your body off the apparatus, and perform a variety of rotational, swinging, and translational movements.
[Main Features]: Enhance arm strength and coordination among all body parts.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct-buried type; the main frame’s bent pipes are made of national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The handrail tubes are made of national-standard steel pipes with a diameter of 42 mm and a wall thickness of 3 mm, and are connected to the bent tubes of the two main frames using 20 mm × 30 mm fittings. National standard steel pipe with a wall thickness of 2 mm;
◆ The panel is fabricated from 2.2 mm‑thick steel plate, with R5 chamfers at all four corners; its surface is embossed to enhance strength, and the panel is riveted to the main frame using stainless‑steel pop rivets.
◆ The equipment nameplate is made of fully stainless steel with a corrosion‑resistant finish, measures 220 × 80 mm, features robust rivets, and has edges that fit tightly against the upright posts to prevent snagging or injury.
◆ The equipment has undergone relevant static load and stability tests in accordance with the GB 19272-2011 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment features a one‑station exercise position and is intended for single‑user operation only.
◆ The embedding depth of the equipment upright shall be no less than 400 mm, and the underground dimensions shall be no less than 400 × 800 × 500 mm.
◆ The components are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. Prior to welding, the components undergo degreasing treatment. Ensure that no oil or contaminants remain on the workpiece surface; welding shall be performed using a CO₂‑shielded arc welder in conjunction with a mixed‑gas shielding process. It features an attractive appearance, with smooth, straight weld beads that require no grinding, and is equipped with a dust collection and treatment system to purify the workshop air, ensuring… The worker is in good health, and the surface treatment employs shot blasting, ensuring thorough rust removal, increasing the workpiece’s surface area, and enhancing… Adhesion of plastic powder, The exterior surface is coated with a green, environmentally friendly electrostatic powder finish, applied using imported electrostatic spraying equipment, ensuring uniform powder distribution. Uniform, with strong powder adhesion; the plastic surface is resistant to acids and alkalis, withstands humid heat, resists aging and corrosion, and boasts an attractive appearance—ideal for humid environments. In wet and acid‑rain environments, the product’s coating formulation contains no toxic elements, and powder recovery is achieved using a cyclone‑type centrifugal separator. Recycling system with a recovery rate of up to 98.6%, reducing powder consumption and minimizing dust pollution; easy to operate, energy-efficient, and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping tape, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
