-
-
-
-
PRODUCTS
-
GYX-L16 Parallel Bars
GYX-L16 Parallel Bars
[Specification] : 2400×768×1404 (mm)
[Safe Usage Scope]: 5400×3800 (mm)
[Instructions for Use]: Grasp the bar with both hands, exert force with both arms to lift your body, then perform elbow bends and straight-arm extensions (dips), repeating the movement.
[Main Features]: Enhance the strength and flexibility of the upper limbs, shoulder girdle, chest, abdomen, and back muscles; provide stability to the upper‑limb joints; and improve coordination and balance.
Category:
Product Description
[Main Technical Parameters]:
◆ Directly buried type: the main upright posts are made of national-standard steel pipes with a diameter of 114 mm and a wall thickness of 3 mm; the transverse spacing between posts is 654 mm, and the longitudinal... Center-to-center spacing: 1400 mm;
◆ The crossbar is a national-standard steel pipe with a diameter of 48 mm and a wall thickness of 2.5 mm, measuring 2,400 mm in length; the support tube also has a diameter of 48 mm. Thickness 3 mm national‑standard steel pipe, connected to the column using a disc‑topped joint, secured with three M12 stainless‑steel anti‑theft bolts. Furthermore, an elastic washer is added at the base of the bolt to prevent loosening, and a disc‑shaped cap with a diameter of 125 mm and a thickness of 8 mm is used to cover the bolt head. Avoid exposure to rainwater; chamfer the perimeter. R3, with a center-to-center spacing of 564 mm between the two horizontal bars and a height of 1404 mm from the ground, complies with national standards. Seek;
◆ The equipment nameplate is made of fully stainless steel with an etched finish, measuring 220×80 mm; it is secured with rivets for robustness, and its edges fit tightly against the upright post.
Avoid causing snagging injuries;
◆ The equipment has undergone relevant static load and stability tests in accordance with the GB 19272-2011 standard and complies with the standard’s requirements.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The embedding depth of the equipment upright shall be no less than 500 mm, and the underground dimensions shall be no less than 600 × 600 × 500 mm.
◆ The buffer layer is 200 mm thick, enhancing safety and reliability and helping to prevent accidental injuries.
◆ The components are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. Prior to welding, the components undergo degreasing treatment. Ensure that no oil or contaminants remain on the workpiece surface; welding shall be performed using a CO₂‑shielded arc welder in conjunction with a mixed‑gas shielding process. It features an aesthetically pleasing appearance, with smooth, straight weld beads that require no post-weld grinding, and is equipped with a dust collection and treatment system to purify workshop air, ensuring… The worker is in good health, and the surface treatment employs shot blasting, ensuring thorough rust removal, increasing the workpiece’s surface area, and enhancing… Adhesion of plastic powder, The exterior surface is coated with a green, environmentally friendly electrostatic powder from the Forbidden City, applied using imported electrostatic spraying equipment, ensuring uniform powder output. Uniform, with strong powder adhesion; the plastic surface is resistant to acids and alkalis, withstands humid heat, resists aging and corrosion, and boasts an attractive appearance—ideal for humid environments. In wet and acid‑rain environments, the product’s coating formulation contains no toxic elements, and powder recovery is achieved using a cyclone‑type centrifugal separator. Recycling system with a recovery rate of up to 98.6%, reducing powder consumption and minimizing dust pollution; easy to operate, energy-efficient, and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping tape, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
