-
-
-
-
PRODUCTS
-
GYX-L15A Pull-up Bar
GYX-L15A Pull-up Bar
[Specification]: 1525X125X2130 (mm)
[Safe Usage Scope]: 5500x4000 (mm)
[Instructions for Use]: Grasp the handle firmly with both hands—either in a pronated grip, a supinated grip, or a mixed grip—and pull upward with force. Lower the handle slowly and smoothly, then repeat the movement. (Note: Minimize body sway, and when gripping the handle, use a thumb‑and‑four‑fingers‑around‑the‑handle technique.)
[Main Features]: Enhance the strength and flexibility of the upper limbs, back, and shoulder‑girdle muscle groups; improve the range of motion in the shoulder, elbow, wrist, and finger joints.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct-buried type: the main upright posts are made of standard international steel pipes with a diameter of 114 mm and a wall thickness of 3 mm; the bar surface has a diameter of 32 mm and a wall thickness of…
3.25 mm seamless steel pipe;
◆ Effective usable width of the pull-up bar: 1,220 mm; center-to-center distance between the two main uprights: 1,400 mm.
◆ The column connections employ a disc‑topped joint design, secured by three M12 stainless steel anti‑theft bolts; the bolt surfaces are coated with an anaerobic adhesive. Oxygen‑tight adhesive prevents backflow; a 125 mm‑diameter, 8 mm‑thick disc seals the column head to prevent rainwater ingress, with a circumferential seal. Chamfer R3; the distance from the upper surface of the single bar to the bottom of the disc‑type cover is 180 mm.
◆ The buffer layer is 300 mm thick, enhancing safety and reliability and helping to prevent accidental injuries.
◆ The embedding depth of the equipment upright shall be no less than 900 mm, and the underground dimensions shall be no less than 600 × 600 × 1000 mm.
◆ The equipment nameplate is made of fully stainless steel with an etched finish, measuring 220×80 mm. It is secured with rivets for robustness, and its edges fit tightly against the upright post, avoiding… Prevent snagging injuries;
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment features a one‑stop exercise station, and only one person may use it at a time.
◆ The equipment has undergone relevant static load stability tests in accordance with the GB 19272-2011 standard and complies with the standard’s requirements.
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface. Welding… Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing, thorough rust removal, increased surface area of the workpiece, enhanced adhesion of the plastic powder, and an imperial‑purple green coating on the exterior. Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an aesthetically pleasing appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6% and resulting in significant savings. The powder reduces dust pollution, is easy to handle, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping tape, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
