-
-
-
-
PRODUCTS
-
GYX-L11A Seated Puller
GYX-L11A Seated Puller
[Specification]: 1237X742X1819mm
[Safe Usage Scope]: 4300X3750 (mm)
[Instructions for Use]: Sit with your back to the machine, grasp the handle with both hands, and pull down firmly. Return slowly to the starting position; each machine is limited to a maximum of two users at a time.
[Main Features]: Enhance upper-body and back muscle strength, and improve cardiovascular and pulmonary function.
Category:
Product Description
[Main Technical Parameters]:
◆ The main columns are constructed from national-standard steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The limit‑stop support beam uses a diameter of 76 mm, a national-standard steel pipe with a wall thickness of 3 mm;
◆ The seat frame is constructed from national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The seat panel is stamped from 4-mm-thick cold-rolled steel, ensuring an 8-year service life; the perimeter features R2 rounded corners to prevent personal injury.
◆ The limit switch employs a fully cast‑steel, three‑face impact‑type internal limiter, increasing the load‑bearing area. The impact pad is specially formulated from vulcanized rubber, offering excellent impact resistance, superior elasticity, and outstanding resistance to aging and extreme temperatures. It is fitted with four high‑quality 6205 bearings, features a central shaft diameter of 25 mm, and has a side‑plate thickness of 10 mm, ensuring compliance with performance requirements. All exposed edges are chamfered with an R3 radius to minimize injury in the event of impact.
◆ The machine’s bearings are equipped with specially designed skeletal oil seals, offering excellent sealing performance, effective water and dust resistance, and long-lasting durability.
◆ The column cap adopts External扣 style , avoid entering rainwater;
◆ The equipment nameplate is made of fully stainless steel via etching, with dimensions of 220 *80mm, with robust rivets and edges that fit tightly against the uprights to prevent snagging and injury;
◆ The equipment has undergone relevant static load, stability, and fatigue tests in accordance with the GB 19272-2011 standard and complies with the standard’s requirements.
◆ The machine’s anti-theft cap is made of nylon, offering impact resistance, aging resistance, and theft protection, ensuring an 8-year service life.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with GB 19272-2011. Standard;
◆ The equipment has 1 Standing exercise position, can 1 Used by humans simultaneously;
◆ The burial depth of the equipment shall be no less than 5 00 mm; the underground installation dimensions shall be no less than 500×500× 6 00mm;
◆ The components are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. For tube bending, a CNC pipe‑bending machine is employed, delivering accurate angles and an aesthetically pleasing finish. Prior to welding, all parts undergo degreasing to ensure that no oil or contaminants remain on the surface. Welding is performed with a CO₂‑shielded arc welder combined with a mixed‑gas process, resulting in clean, smooth welds that require no post‑weld grinding. A dust‑collection and treatment system further purifies workshop air, safeguarding worker health. Surface treatment utilizes shot blasting, achieving thorough rust removal while increasing the surface area of the workpiece and enhancing the adhesion of the powder coating. The exterior is finished with a green‑environmental, electrostatically applied powder coating—produced using imported electrostatic spray equipment—ensuring uniform powder distribution, strong adhesion, and excellent resistance to acids, alkalis, humidity, heat, aging, and corrosion. This coating is ideal for humid and acid‑rain environments. The product’s paint formulation contains no toxic elements. Powder recovery is handled by a cyclone‑type centrifugal separator, achieving a recovery rate of up to 98.6%, which reduces material waste and minimizes dust pollution while offering convenient operation and energy efficiency.
◆ The equipment is packaged in a double-layer system: thickened bubble wrap inside and strapping tape on the outside, effectively protecting it from impacts during transit and ensuring it arrives undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
